Ohm's law: The idea
In plain words
The idea explained without jargon
Push harder and more flows. Ohm's law says that the current through a wire is in proportion to the voltage, the electrical push, across it [1]. Double the voltage and the current doubles. The ratio between them is the wire's resistance, which depends on its material, its length and its thickness: a long thin wire resists more than a short thick one. Resistance also turns part of the energy into heat, which is why a heater element glows and why long cables waste power. The law holds well for metals at a steady temperature, but not for every material, so it is a rule about conductors rather than a law of nature.
as of 2026-11-11
Key equation
The equation that sums it up, and what each symbol means
- Equation
- V = I R
- Symbols
- {"V":"the voltage across the conductor, in volts","I":"the current through it, in amperes","R":"its resistance, in ohms"}
- Note
- The potential difference between two points equals the current times the resistance between them [1]. Combined with the power a current delivers, P = I V, it gives the heat produced in a resistance as P = I^2 R [6], which grows with the square of the current.
as of 2026-11-11
An analogy
A picture from everyday life that makes the idea easier to hold
Think of water flowing through a pipe from a tank. The height of the tank is the voltage, the flow is the current and a narrow pipe is a high resistance. Raise the tank and more water flows; narrow the pipe and less does. The picture stops being true in detail: water in a pipe speeds up in the middle and swirls, while charge in a metal drifts slowly and evenly.
as of 2026-11-11
Sources
- Ohm's Law IEEE, Engineering and Technology History Wiki
- Electric Power and Energy (College Physics, section 20.4) OpenStax, hosted by University of Central Florida Pressbooks