Material Insights · Understanding the Material World

Ohm's law: Technologies

Technologies

The technologies that rely on it, and how each one uses it

Limits 14
  • Tel Electric telegraph A long line resists the current, so the signal fades with distance and long lines needed relays or stronger batteries.
  • SCb Submarine communications cable The resistance of thousands of kilometres of copper weakened telegraph signals, so cables needed very sensitive receivers.
  • Gen Generators and alternators Current through the resistance of the copper windings turns some power into heat, a main loss in large machines.
  • Mot Electric motors and drives Resistance in the copper or aluminium windings turns part of the current into heat, often the largest single loss.
  • PE Transformers and power electronics Winding and switch resistance turn part of the current into heat, rising with the square of the current.
  • PF Electrical loss reduction Current through a resistance always makes heat, so some loss is unavoidable; Ohm published the law in 1827.
  • HVAC AC transmission The resistance of the wires turns part of the power into heat; together with distribution, about 5% of US electricity was lost this way in 2018 to 2022.
  • Ceiling fan Current through the winding and rotor wastes power as heat; a BLDC rotor carries no current, which removes the rotor loss.
  • Electric generator Current in the copper windings loses power as heat, which sets the efficiency and the cooling needed.
  • Electric motor Resistance in the copper windings turns part of the electricity into heat.
Show 4 more
  • EV charger Current in cables and switches wastes energy as heat, which sets the cooling needed at high power.
  • Insulated power cable Resistance in the conductor turns current into heat, so heat limits the current a cable can carry.
  • Lithium-ion battery Internal resistance turns part of every charge and discharge into heat, which is why round-trip efficiency always stays below perfect.
  • Transformer and power converter Current in the windings loses power as heat, which sets the load loss.
Relied on by 11
  • Tlp Telephone The carbon transmitter changes its resistance as the voice presses on it, so the current changes in step with the sound.
  • EH Electric heating A heating element turns current into heat at a rate set by its resistance and the square of the current, which fixes how elements are sized.
  • EAF Electric arc furnace Current forced through the resistance of the arc and the charge turns into the heat that melts the steel.
  • Cab Underground, submarine and superconducting cables A cable's resistance sets the voltage drop and the heat for a given current, so conductor size is chosen from Ohm's law.
  • Dist Distribution grids, mini-grids and interconnectors Transformers raise the voltage so less current carries the same power, which cuts the heat lost in the lines' resistance.
  • HVDC HVDC links Very high voltage lets a line carry large power with a small current, so resistive loss over long distances stays low.
  • PF Electrical loss reduction Thicker conductors and power-factor correction cut the current or the resistance, and so the I squared R losses in wiring.
  • Electric water heater Current through the resistance element releases heat in it.
  • Printed circuit board Copper tracks carry current with a small resistance, so track width and thickness set how much current a board can carry.
  • Smart electricity meter A voltage divider and a shunt resistor turn mains voltage and current into small signals the converter can read.
  • Vehicle wiring harness A wire's resistance sets how much voltage is lost along it, so the conductor's metal and cross-section fix how much current it can carry.

as of 2026-11-11