Material Insights · Understanding the Material World

Electric generator

A machine that turns motion into electricity.

Energy equipment · No. 15

  • Second industrial revolution
Energy equipment · Product

In one 31 MW power-station generator, over 99% of lifetime emissions come from the electricity it loses as heat while running, not from making it.

Chart: Illustration: Electric generator

Where it comes from

Chart: Map of where it comes from

Zenobe Gramme began making his dynamo, the first industrial generator, in 1871, and the first machines were sold for electroplating and electric lighting. Every power-station generator since is a larger descendant of that coil-and-magnet machine.

Three things to know
  1. A 15 MW direct-drive wind generator weighs 185 tonnes and holds 10.9 tonnes of magnets; a medium-speed design weighs 58 tonnes and holds 0.96 tonnes.
  2. A 500 kVA diesel generating set weighs 2,924 kg and burns 101.2 litres of diesel an hour at full standby load.
  3. In India, diesel generating sets up to 800 kW must meet the CPCB IV+ emission norms, and the older CPCB II sets could not be sold or used after 1 July 2024.
The journey
  1. 1 Electrical steel and copperThin steel sheets for the core, copper for the windings
  2. 2 Rotor and statorA wound or magnet-carrying rotor inside a stator of coils
  3. 3 Impregnate and testResin-soaked windings, then a run to check efficiency and heating
  4. 4 CouplingMounted on a steam, gas, water or wind turbine, or a diesel engine
  5. 5 UseHours of running a year, with about 2% of the power lost as heat
  6. 6 RecyclingMain parts can be recycled; some must be broken up to separate the materials
Covered in Vibration, waves and resonance in machines and structuresEngineeringElectricity and magnetism: circuits, motors, generators and gridsEngineeringControl and systems: feedback, stability and how machines are made to behaveEngineering
Go deeper pick a tab to open it in full