Vibration, waves and resonance in machines and structures
Everything with mass and springiness vibrates at a frequency of its own, and a gentle push at that frequency can build into a large motion. This module explains natural frequency, damping and resonance, follows real cases from footbridges, chimneys, washing machines and cars to the Tacoma Narrows Bridge, covers waves, sound and decibels, and ends with tuned dampers, earthquake design and how engineers measure and avoid resonance. It works eighteen estimates.
All courses / Understanding Engineering / Module 7Vibration, waves and resonance in machines and structures
Everything with mass and springiness vibrates at a frequency of its own, and a gentle push at that frequency can build into a large motion. This module explains natural frequency, damping and resonance, follows real cases from footbridges, chimneys, washing machines and cars to the Tacoma Narrows Bridge, covers waves, sound and decibels, and ends with tuned dampers, earthquake design and how engineers measure and avoid resonance. It works eighteen estimates.
5 parts · 18 sections · about 50 minutes · 0 of 5 parts readBy the end you will be able to
- Estimate the natural frequency of a mass on a spring, a pendulum and a beam, and say why stiff, light things ring high
- Use the damping ratio to say how fast a vibration dies away and how large resonance can grow
- Explain with numbers why a ceiling fan, a footbridge, a chimney or a washing machine shakes at certain speeds
- Calculate the tension in a cable from its pitch, the wavelength of a sound and the level of combined noise sources in decibels
- Choose between isolation, damping and a tuned mass damper for a given vibration problem, and size each roughly
- Describe how buildings are designed to sway safely in an earthquake, and how engineers measure and avoid resonance
Contents
- Part 1 Why things vibrate: mass, springiness and damping
A bouncing car, a swinging lamp and a humming wire share one story. Each has a mass that resists change and a spring-like force that pulls it back. This part shows how those two things fix the rate of vibration, why stiff and light things ring high, and how friction makes the ringing die away. Later parts depend on these three ideas.
- Anything with mass and a restoring force will oscillate, and the two together fix its natural frequency
- Stiff and light things ring high, heavy and floppy things ring low
- Damping is the energy lost on every swing, and it decides how long a vibration lasts
- Part 2 Forced vibration and resonance: when small pushes become large motion
A car stuck in a sandy rut can often be freed by two people who push only as it rocks away from them, so that small shoves timed to its own rocking add up. That is resonance, and it explains why a ceiling fan wobbles at one speed, why a footbridge can sway under a crowd, and why a washing machine shudders as it spins up. This part shows how big the build-up can be, what limits it, and what happened in some real cases.
- A push repeated at the natural frequency builds up motion until damping balances it, and the build-up is about 1 / (2 x zeta)
- Footbridges sway because people and bridge begin to move together
- Wind can feed a structure: vortex shedding on chimneys and the fall of the Tacoma Narrows Bridge
- Machines shake when a spinning part is off-centre: the washing machine that walks and the engine on its mounts
- Part 3 Balancing, waves and sound
A vibration that leaves its source becomes a wave. This part starts with the rotating parts that cause so many vibrations and how they are balanced, then follows the disturbance as it travels: along a taut steel cable, through air as sound, and into the ear. It ends with pitch and loudness, and the decibel scale that engineers use for the second.
- Balancing puts a rotating part's centre of mass on its axis, and the force it removes grows with the square of speed
- A wave is a disturbance that travels without carrying material along, and a taut cable shows how wave speed and frequency are linked
- Sound is a pressure wave in air, and its wavelength explains why bass goes round corners
- Pitch follows frequency, loudness follows intensity, and the decibel scale compresses a huge range into a few tens
- Part 4 Controlling vibration: isolation, tuned masses and noise
Once you know where a vibration comes from and where it resonates, there are four moves: cut the path, change the frequency, add damping, or add a second mass that fights the first. This part covers each, with a generator set on springs, a tall tower with a swinging ball, and the noise from the same generator set at a neighbour's window.
- Vibration isolation works by mounting a machine on springs so soft that the shaking is well above their natural frequency
- Tuned mass dampers add a second, small mass that moves against a tall structure and soaks up its sway
- Noise is vibration that escapes into the air, and a generator set shows how each step in the path can be cut
- Part 5 Earthquakes, measuring vibration and avoiding resonance
An earthquake is a forced vibration with the whole ground as the driver, and a tall building is a tuned structure with its own period. This part shows how those two meet, how Indian codes design buildings to sway without falling, and how engineers measure natural frequencies and keep machines and structures clear of them. It ends with resonance used on purpose, in a gauge that measures strain by its pitch.
- An earthquake sends waves through the ground, and a building feels them as a push on every floor
- A building has a natural period that rises with its height, and tall buildings sway slowly
- Buildings are designed to bend and yield without falling, and the code cuts the force on the strength of that ductility
- Engineers measure natural frequencies by tapping and listening, then keep operating speeds well clear of them
- Wrap-up Key terms, try it in the table, final quiz, sources