Vibration, waves and resonance in machines and structures: Key terms, quiz and sources
All courses / Understanding Engineering / Module 7: Vibration, waves and resonance in machines and structures Wrap-upVibration, waves and resonance in machines and structures: review
Key terms
- Vibration
- A repeated back-and-forth motion about a rest position.
- Frequency
- The number of cycles of a vibration per second, measured in hertz (Hz).
- Natural frequency
- The rate at which a system vibrates by itself, fixed by its stiffness and mass.
- Restoring force
- The force that pulls a displaced object back towards its rest position.
- Damping
- The loss of vibration energy, mostly as heat, on every cycle.
- Damping ratio
- The fraction of critical damping a system has, written zeta; zero means no loss and 1 means no overshoot.
- Forced vibration
- Vibration driven by a repeating outside force at its own frequency.
- Resonance
- A large response when the driving frequency matches a natural frequency.
- Flutter
- A self-excited vibration in which motion changes the wind force so that it feeds the motion, as at Tacoma Narrows.
- Vortex shedding
- The alternate peeling of whirls from the two sides of a blunt body in a flow, which gives it sideways kicks.
- Unbalance
- An off-centre mass in a rotating part, which pulls sideways with a force that grows with the square of speed.
- Critical speed
- A rotor speed at which the drive frequency matches a natural frequency of the shaft.
- Wave
- A disturbance that travels through a material, carrying energy and not the material itself.
- Standing wave
- A fixed pattern of vibration formed when waves reflect between two ends, as on a taut cable.
- Harmonic
- A vibration at a whole-number multiple of the fundamental frequency.
- Decibel (dB)
- A ratio scale of sound level in which every factor of 10 in intensity adds 10 dB.
- Transmissibility
- The fraction of a machine's shaking force that passes through its mounts to the floor.
- Tuned mass damper
- A secondary mass on a spring, set to the structure's frequency, that moves against the sway and absorbs it.
- Base shear
- The total sideways force at the base of a building during an earthquake, equal to the sum of the inertia forces on all floors.
- Ductility
- The ability of a member to deform a long way past yield without breaking, so that it absorbs energy.
Try it in the table
- Open 'Washing machine'. Find the drum spin speed and drum capacity. Convert the speed to hertz, then repeat estimate 7 with a 0.5 kg lump at 0.2 m to see how the pull at top speed changes, and say what the machine must do at about 3 Hz.
- Open 'Tower crane' and 'Lifting crane'. Work out the swing period of a load hung on 16 m and on 36 m of cable, then say why a driver who waits out one full swing before moving again can finish a lift sooner than one who fights the sway.
- Under 'Seismic base isolation', 'Seismic waves' and 'Seismometer', pick a hospital you know and estimate its height and period with estimate 15. Say how lengthening the period to 2.5 s changes the ground motion the building feels, and what gap must surround it.
- Open 'Wind turbine generating set' and 'Wind turbine blade'. Find the rotor diameter and the rated speed range, convert the speeds to 1P and 3P in hertz as in estimate 17, and judge where a tower frequency of 0.3 Hz sits.
- Read 'Cable-stayed bridge' and 'Iron suspension bridge'. For a span of 300 m with a deck of 10,000 kg per metre, say whether a stay or a deck mode is more likely to be near the 1.3 Hz sideways limit for footbridges, and how the Tacoma lesson applies to the deck.
- Look at 'Heavy-duty diesel engine', 'Electric generator' and 'Rolling bearing'. For a 1,500 rpm generator set on 20 mm spring mounts, use estimate 12 to find the natural frequency and the share of force passed to the floor, then add the noise from estimate 14 at 15 m.
Final quiz
A heavy mass hangs on a spring and bobs up and down once every 2 seconds. If you hang a mass one quarter as heavy on the same spring, the period becomes about
Frequency goes with the square root of (stiffness / mass), so a quarter of the mass doubles the frequency and halves the period, from 2 s to 1 s.Why does an aluminium ruler ring at nearly the same pitch as a steel ruler of the same size?
For a given shape, frequency scales with the square root of (modulus / density). Aluminium is about a third as stiff and about a third as dense as steel, so the ratio is almost equal.A ceiling fan wobbles badly at one middle speed and little at the highest speed. The best explanation is
Resonance. The out-of-balance pull rises with speed, but the response peaks where the drive frequency equals the fan's sway frequency, and falls above it.A 40 m steel footbridge has a vertical natural frequency of 3.1 Hz. The same design stretched to 60 m would have about
Frequency falls with the square of the span. (40 / 60)^2 = 0.44, so 3.1 x 0.44 = 1.4 Hz, which is in the walking band.A sound meter reads 80 dB near a machine. A second identical machine is started beside it. The reading becomes about
Two equal sources double the intensity, which adds 10 x log10(2) = 3 dB.A diesel generator set is bolted to the floor and shakes at 25 Hz. It is put on springs that give a natural frequency of 5 Hz. About what fraction of the force now reaches the floor?
The ratio r is 25 / 5 = 5, and transmissibility is 1 / (r^2 - 1) = 1 / 24, about 4%. Some force always passes through.What is the main reason a tuned mass damper is used on a very tall tower?
A tall slender tower has low natural damping. A tuned mass damper moves against the sway and absorbs its energy near the tuned frequency.Which statement about the Tacoma Narrows Bridge collapse best matches the accepted explanation?
Analysis showed torsional flutter: the deck's own motion changed the wind force so as to add energy each cycle. The whirl-shedding frequency did not match what was seen.Sources for this module
- Bloomfield, How Things Work (Wiley, 2015) · ch. 9, 'Resonance and Mechanical Waves'
- Petroski, To Engineer Is Human (Macmillan, 1985) · ch. 13, 'The Ups and Downs of Bridges'
- Feynman, Leighton and Sands, The Feynman Lectures on Physics, vol. I (Caltech online edition) · further reading (the site does not permit automated fetching, so the physics was checked against standard results and the sources below): ch. 21, 'The Harmonic Oscillator', https://www.feynmanlectures.caltech.edu/I_21.html; ch. 23, 'Resonance', https://www.feynmanlectures.caltech.edu/I_23.html
- Feynman, Leighton and Sands, The Feynman Lectures on Physics, vol. I (Caltech online edition) · further reading: ch. 47, 'Sound. The Wave Equation', https://www.feynmanlectures.caltech.edu/I_47.html
- Feynman, Leighton and Sands, The Feynman Lectures on Physics, vol. I (Caltech online edition) · further reading: ch. 48, 'Beats', https://www.feynmanlectures.caltech.edu/I_48.html
- Feynman, Leighton and Sands, The Feynman Lectures on Physics, vol. I (Caltech online edition) · further reading: ch. 49, 'Modes', https://www.feynmanlectures.caltech.edu/I_49.html
- Feynman, Leighton and Sands, The Feynman Lectures on Physics, vol. I (Caltech online edition) · further reading: ch. 50, 'Harmonics', https://www.feynmanlectures.caltech.edu/I_50.html
- Feynman, Leighton and Sands, The Feynman Lectures on Physics, vol. I (Caltech online edition) · further reading: ch. 51, 'Waves', https://www.feynmanlectures.caltech.edu/I_51.html
- STRUCTURE magazine (structuremag.org), article on the 1940 Tacoma Narrows Bridge failure (read November 2026) · wind about 42 mph; main span 2,800 ft; stiffening girders about 8 ft deep; vertical then torsional motion, deck tilting about 45 degrees; collapse at 11:10 am; accepted cause torsional flutter, vortex shedding ruled out; https://www.structuremag.org/?p=13425
- The Institution of Structural Engineers, Dallard et al., 'The London Millennium Footbridge', The Structural Engineer, vol. 79, issue 22 (2001) · opened 10 June 2000; lateral instability of footbridges below about 1.3 Hz under enough walkers; retrofit with viscous and tuned mass dampers to above 20% of critical damping; https://www.istructe.org/journal/volumes/volume-79-(published-in-2001)/issue-22/the-london-millennium-footbridge/
- Guinness World Records, 'Largest tuned mass damper' (read November 2026) · Taipei 101: 660 tonnes, between the 87th and 92nd floors, maximum extension 1.5 m, largest recorded swing 1 m in Typhoon Soudelor (August 2015); https://www.guinnessworldrecords.com/world-records/774616-largest-tuned-mass-damper
- Encyclopaedia Britannica, 'Taipei 101' (read November 2026) · 508 m including spire; completed 2004; https://www.britannica.com/place/Taipei-101
- Bureau of Indian Standards, IS 1893 (Part 1):2016, Criteria for earthquake resistant design of structures · cl. 7.6.2, approximate fundamental period (RC moment frame 0.075 x h^0.75, steel 0.085 x h^0.75), via the Autodesk Robot Structural Analysis help page on IS 1893 (Part 1):2016, https://help.autodesk.com/cloudhelp/2025/ENU/RSAPRO-UsersGuide/files/GUID-1DFE3234-1AF0-4A7D-8744-C91C323C827E.htm; zone factors (II 0.10, III 0.16, IV 0.24, V 0.36), R = 5 for a special RC moment frame, Sa / g = 1.36 / T for medium soil from 0.55 to 4 s, and Ah = Z I Sa / (2 R g), read from the official text of the 2002 edition (Public.Resource.Org copy, https://law.resource.org/pub/in/bis/S03/is.1893.1.2002.pdf), values the 2016 edition keeps
- Central Pollution Control Board, India, standard for diesel generator sets up to 1,000 kVA (G.S.R. 371(E), 17 May 2002, as amended) · 75 dB(A) at 1 m from the enclosure for sets made on or after 1 January 2005; 25 dB(A) insertion loss; https://cpcb.nic.in/uploads/Standerds/Generator-Set/divisionsofheadoffice/generator1000diesel.pdf
- HyperPhysics, 'Equal Temperament' (Georgia State University) · 12 equal semitones per octave; A4 set at 440 Hz by the 1939 conference; https://hyperphysics.gsu.edu/hbase/Music/et.html
- Ministry of Environment and Forests, India, Noise Pollution (Regulation and Control) Rules, 2000, S.O. 123(E), 14 February 2000 · Schedule: residential area 55 dB(A) Leq by day and 45 dB(A) Leq at night; day 6 am to 10 pm; copy of the notification at https://v1.wii.gov.in/node/1486; same values in the CPCB standards listed by the Delhi Pollution Control Committee, https://www.dpcc.delhigovt.nic.in/cpcbstandards
- Building magazine, 'Arup: we have fixed the Millennium Bridge' (2001, read November 2026) · sway up to 75 mm each way; 37 viscous dampers and 54 tuned mass dampers; about 5 million pounds; https://building.co.uk/news/arup-we-have-fixed-the-millennium-bridge/1015137.article
- Klembczyk, 'Long Term Case Study on Metal Bellows Dampers', Taylor Devices (read November 2026) · 37 viscous dampers fitted to the Millennium Bridge in late 2001; reopened February 2002; https://www.taylordevices.com/wp-content/uploads/Long-Term-Case-Study-on-Metal-Bellows-Dampers.pdf
- Ghosh, 'Observations from the Bhuj Earthquake of January 26, 2001', PCI Journal, March to April 2001 · open ground storeys and Ahmedabad collapses; https://www.pci.org/PCI_Docs/Publications/PCI%20Journal/2001/March-April/Observations%20From%20the%20Bhuj%20Earthquake%20of%20January%2026,%202001.pdf
- Drishti IAS, 'Rollback of Seismic Code of 2025' (13 March 2026, read November 2026) · web