Material Insights · Understanding the Material World

Electric generator: Working

What it is

The product and the job it does, in a short paragraph

An electric generator turns the rotation of a shaft into electricity by moving a magnetic field past coils of copper wire. This node covers one generator of any size under the trade headings for electric motors and generators and for generating sets: large synchronous machines in power stations, permanent magnet machines in wind turbines, and diesel generating sets. The functional unit is one generator; the reference sizes are 31 MW, 15 MW and 500 kVA [1][3][5].

as of 2026-11-13

How it works

How it does its job, step by step in plain words

A turbine or engine turns the rotor. The rotor carries the magnetic field, made by a direct-current winding in a synchronous machine or by magnets in a permanent magnet machine. As the field sweeps past the copper windings in the stator, it induces an alternating voltage, which leaves as three-phase power. A synchronous machine locks its speed to the grid frequency, so a four-pole machine turning at 1500 rpm gives 50 Hz [1]. A diesel generating set mounts an engine and an alternator together as one unit [5]. A transformer then steps the voltage up to the grid. Heat from the losses is carried away by air, hydrogen or water [9].

as of 2026-11-13

Key specifications

The numbers that describe it, each with unit, variant, year and source

SpecValueUnitVariantYearSource
Rated output of the reference ABB generator (type GBA 1120)31,000kWSynchronous (ABB GBA 1120, 31 MW)– [1]
Efficiency at the chosen operating point (1500 rpm)98.02%Synchronous (ABB GBA 1120, 31 MW)– [1]
Rated apparent power of a smaller ABB machine (type AMG 0900, 11 kV, 750 rpm)5125kVASynchronous (ABB AMG 0900, 5.1 MVA)– [2]
Efficiency of that machine at its operating point97%Synchronous (ABB AMG 0900, 5.1 MVA)– [2]
Total weight of a 15 MW direct-drive generator185.283tPermanent magnet (direct drive, 15 MW)2025[3]
Total weight of a 15 MW medium-speed generator57.556tPermanent magnet (medium speed, 15 MW)2025[3]
Standby rating of the reference diesel set (400 kW at 50 Hz, 1500 rpm)500kVADiesel generating set (Caterpillar DE500 GC, 500 kVA)2026[5][6]
Net weight with oil of the diesel set2924kgDiesel generating set (Caterpillar DE500 GC, 500 kVA)2026[6]
Fuel burnt at 100% standby load101.2litres per hourDiesel generating set (Caterpillar DE500 GC, 500 kVA)2026[6]
Efficiency of the generator part at 100% load93.4%Diesel generating set (Caterpillar DE500 GC, 500 kVA)2026[6]

as of 2026-11-13. ABB's two declarations carry no date; they follow the April 2000 product-specific requirements for rotating electrical machines [2]. The AMG 0900 declaration's material table is misaligned (its per-kVA column is shifted by one row from forged steel down), so only its rating and efficiency are used [2].

Variants

The variants whose make-up or footprint differs a lot, what defines each and its share of units

VariantDefining specYearSource
SynchronousRotor field made by a direct-current winding; almost all steel, with 8% copper by mass in a 31 MW machine; for power stations and large plants– No share of units found [1]
Permanent magnetRotor carries NdFeB (neodymium iron boron) magnets, 10.9 t in a 15 MW direct-drive wind generator; no rotor winding2020No share found; the JRC says permanent-magnet wind technologies are steadily gaining market share [21]; magnets [3]
Diesel generating setA diesel engine and an alternator built as one unit; 2,924 kg for 500 kVA [6]; in a 2016 study of a 15 litre set the alternator was 44.7% and the engine 37.8% of the mass [7]2024No share found; India's market was 50% in the 5 to 75 kVA band in 2024 [19]

as of 2026-11-13

Limits

The physical limits set by science and the engineering limits of today's design, with today's value

LimitKindLimitTodayUnitSource
A generator is not a heat engine, so only resistance, magnetic and friction losses stand between it and 100% conversion (largest hydrogen- and water-cooled units)Physical10099% of shaft power[9]
A permanent magnet direct-drive generator gets prohibitively heavy and costly above about 20 MW (15 MW reference today)Engineering2015MW[4]
Largest generator rating offered, which the maker calls the world's most powerful (four-pole, hydrogen-cooled rotor, water-cooled stator)Engineering– 2250MVA[9]

as of 2026-11-13

Science it relies on

The science principles it works by or is limited by

Relies on Limited by
  • Ohm's law Current in the copper windings loses power as heat, which sets the efficiency and the cooling needed.

as of 2026-11-13

Sources

  1. Environmental Product Declaration for AC-machine type GBA 1120 ABB (Generators and motors, EPD under the 2000 product-specific requirements for rotating electrical machines)
  2. Environmental Product Declaration AC generator type AMG 0900, 5125 kVA power ABB
  3. A prospective life cycle assessment of drivetrain technologies in offshore wind (Dighe, Bansal, Jansen, Breuer and van der Mijle Meijer), Journal of Physics: Conference Series 3131, 012043 IOP Publishing, EERA DeepWind Conference, 2025, Table 2
  4. Beyond 15 MW: A cost of energy perspective on the next generation of drivetrain technologies for offshore wind turbines (Barter, Sethuraman, Bortolotti, Keller, Torrey), Applied Energy 344, 121272 Elsevier, via the US National Renewable Energy Laboratory, 2023
  5. DE500 GC (50 Hz) | 500 kVA Diesel Generator Caterpillar, 2026
  6. Modèle Secours Performance DE500 GC 50 Hz (standby performance data sheet, in French) Caterpillar, hosted by HelloPro
  7. A Life Cycle Assessment of a Diesel Generator Set (Kelly Benton, graduate thesis) Montana Tech of the University of Montana (Master of Science thesis), 2016
  8. GIGATOP generators Arabelle Solutions, 2025
  9. India Diesel Genset Market Size, Share & Trends Analysis, 2032 P&S Intelligence (PS Market Research), 2025
  10. Raw material demand for wind and solar energy (JRC factsheet) European Commission Joint Research Centre (Publications Office of the European Union), 2020