Material Insights · Understanding the Material World

Electric generator: Interventions

Interventions

Changes that would cut emissions or material use, by lever and life stage, with effect per unit, readiness, adoption, evidence and who acts

LeverLife stageChangeEffect per unitReadinessAdoptionWho actsSource
EfficiencyUseCut generator losses in large machines, where use is 99.5% of lifetime emissionsCalculated: raising the 31 MW machine from 98.02% to 99.02% would cut losses from about 626 kW to about 307 kW, saving about 2 GWh a year at 6,500 hours [1]Deployed: the largest hydrogen- and water-cooled units reach 99% [9]Largest units up to 99%Generator makers, power-station owners[1][9]
DesignComponents designChoose a medium-speed permanent magnet generator with a gearbox instead of direct driveMagnets 10.904 t to 0.961 t and generator weight 185.3 t to 57.6 t for 15 MW; the climate impact of the whole drivetrain is about the same, 6.8 against 7.1 g CO2e per kWh [3]Both layouts are studied for a reference 15 MW offshore farm; deployment share not foundNot reportedWind turbine makers[3]
SubstituteComponents designReplace permanent magnets with a low-temperature superconducting direct-drive generatorMass 50% lower than a direct-drive permanent magnet generator in a design study [4]Research: a modelled designNoneResearch groups, turbine makers[4]
Change routeUseRun backup diesel sets on HVOUp to 90% lower carbon emissions than conventional diesel without modifications, a maker's figure reported in trade press with no study named [8]Deployed: Kohler says its sets are compatible with HVO [8]Not reportedSet owners, fuel suppliers[8]
CircularityEnd of lifeRecover the metals of retired setsOver 94% of a 3,750 kVA set is recyclable metals [8]; no emissions saving per unit foundDeployed for metals; magnets not describedNot reportedRecyclers, set makers[8]
ElectrifyUseReplace some diesel backup with hydrogen fuel cellsNot quantified; Kohler unveiled a 100 kW solid polymer electrolyte membrane fuel cell system [8]Piloted: unveiled, no deployment figuresNot reportedBackup power buyers, set makers[8]

as of 2026-11-13

Sources

  1. Environmental Product Declaration for AC-machine type GBA 1120 ABB (Generators and motors, EPD under the 2000 product-specific requirements for rotating electrical machines)
  2. A prospective life cycle assessment of drivetrain technologies in offshore wind (Dighe, Bansal, Jansen, Breuer and van der Mijle Meijer), Journal of Physics: Conference Series 3131, 012043 IOP Publishing, EERA DeepWind Conference, 2025, Table 2
  3. Beyond 15 MW: A cost of energy perspective on the next generation of drivetrain technologies for offshore wind turbines (Barter, Sethuraman, Bortolotti, Keller, Torrey), Applied Energy 344, 121272 Elsevier, via the US National Renewable Energy Laboratory, 2023
  4. Kohler publishes product lifecycle analysis Electronic Specifier, 2024
  5. GIGATOP generators Arabelle Solutions, 2025