Material Insights · Understanding the Material World

Asphalt concrete paving

Hot bitumen mixed with stone makes a smooth, waterproof road surface.

Moving people and goods · Road · No. 447

  • Steam and steel
  • Readiness 9 of 9
  • Process
Moving people and goods · Technology

Most paved roads are crushed stone held together by a few per cent of sticky oil residue, and old roads become new ones.

Chart: Illustration: Asphalt concrete paving

Where it comes from

Chart: Map of where it comes from

Paris laid mastic asphalt in 1835. In 1849 an engineer saw rock asphalt crushed by cart wheels make a good road, and Paris paved with it from 1854. E. J. DeSmedt laid the first US strip in Newark in 1870.

Three things to know
  1. A typical asphalt mix is about 95% stone and sand and 5% binder by the industry's figures.
  2. In 2021 the US industry collected 101 million tons of old pavement for reuse in new roads.
  3. Warm-mix asphalt, made at lower temperatures, was 41% of US production in 2021.
The journey
  1. 1 Crude oilRefined; the heaviest residue becomes bitumen, the asphalt binder
  2. 2 AggregateCrushed stone and sand from quarries, graded by size
  3. 3 Mixing plantAggregate is dried and heated, then coated with hot binder
  4. 4 Truck and paverThe hot mix is spread in an even layer
  5. 5 RollersRolling packs the layer dense before it cools
  6. 6 RecyclingOld surfaces are milled off and fed back into new mix
Go deeper pick a tab to open it in full