Asphalt concrete paving: Overview
What it does
The job the technology does for people, in a short paragraph
Asphalt paving gives roads, car parks and runways a smooth, waterproof and quiet surface that can be laid quickly and repaired in patches. Paris first paved streets with rock asphalt in 1854, and the first US strip followed in 1870 [6]. Of the 2.8 million miles of paved road in the United States, about 94% are surfaced with asphalt, as are about 80% of runways in the federal airport system [2].
as of 2026-11-11
How it works
The working principle in plain words, step by step
An asphalt mix is mostly crushed stone and sand, held together by a small share of bitumen, the black, sticky residue left when crude oil is refined [2]. At a mixing plant the stone is dried and heated, to about 300 °F (150 °C) in hot mix, and coated with hot binder [3]. Trucks carry the mix to a paver, which spreads it in an even layer, and heavy rollers press it dense before it cools. As it cools the binder stiffens and locks the stones together, while staying a little flexible, so the surface bends under loads instead of cracking. Warm mix is made 25 to 50 °F cooler [3]. Old surfaces are milled off and mixed back into new asphalt [4].
as of 2026-11-11
Key figures
The handful of numbers that size it up, each with its unit, year and source
| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Asphalt mixture produced in the United States | 432 | million tons | 2021 | [2] |
| Reclaimed asphalt pavement collected for reuse in the US | 101 | million tons | 2021 | [2] |
| Warm-mix share of US asphalt pavement produced | 41 | % | 2021 | [2] |
| Cradle-to-gate emissions of US asphalt mix | 51.4 | kg CO2e per ton | 2019 | [3] |
as of 2026-11-11. Tons are US short tons, as in the sources.
Where it is used
The main places and products the technology is found in
- Motorways, main roads and city streets
- Airport runways and taxiways
- Car parks, driveways and paths
- Surfacing over older concrete roads
as of 2026-11-11
Scale today
How much of it there is now: units in use, made each year and who uses it
- Installed
- About 94% of 2.8 million miles of US paved roads [2]
- Made per year
- 432
- Unit
- million tons of mix (US)
- Year
- 2021
- Note
- United States only; no world total was found in the sources opened.
as of 2026-11-11
Sources
- The Asphalt Pavement Industry: Fast Facts National Asphalt Pavement Association (NAPA), an industry association
- GHG Emissions Inventory for Asphalt Mix Production in the United States: Current Industry Practices and Opportunities to Reduce Future Emissions (SIP-106) National Asphalt Pavement Association, an industry association (J. Shacat, J. R. Willis, B. Ciavola), 2022
- Asphalt's Generation of Change (FHWA-HIF-07-012, reprinted from Better Roads, 2003) US Federal Highway Administration
- Paving the Way (Historical Note) MRS Bulletin (K. J. Anderson), 1989