Material Insights · Understanding the Material World

Blast furnace and cast iron: Science

Principles

The science it rests on, with why each principle matters to it

Relies on Limited by

as of 2026-11-10

Discoveries

The discoveries that made it possible: when, by whom and what was found

YearWhoWhat
1777Antoine LavoisierA theory of combustion as reaction with oxygen, replacing phlogiston [8]
1905Octave BoudouardThe equilibrium between carbon, carbon monoxide and carbon dioxide, an important reaction inside a blast furnace, which favours carbon monoxide at high temperature [11]
1944Harold EllinghamFree-energy diagrams of metal oxides; in an iron furnace haematite is reduced near the top at 600 to 700 °C [9]

as of 2026-11-10

The science explained

The science behind it explained for a curious reader

A blast furnace is a counter-current reactor: solids go down while hot gas goes up, like a waterfall falling through rising steam. At the bottom, coke burns in the hot blast and becomes carbon monoxide. That gas climbs through the falling ore and picks off its oxygen bit by bit; near the top, at 600 to 700 °C, haematite has already started to lose oxygen [9]. By the time the ore reaches the lower, hotter zones it is mostly iron. Iron that has dissolved carbon melts at a lower temperature than pure iron, so it trickles down as liquid. The waste rock combines with limestone into slag, lighter than iron, which floats on top and is drawn off separately [7].

as of 2026-11-10

Sources

  1. Pig iron production International Iron Metallics Association
  2. The Chemical Revolution: Antoine-Laurent Lavoisier (International Historic Chemical Landmark booklet) American Chemical Society, 1999
  3. Wikipedia: Ellingham diagram
  4. Boudouard reaction Wikipedia