Blast furnace and cast iron: Energy footprint
Energy in use
The energy it uses or converts while it works, and how efficiently
- Consumption
- Coke and injected coal, burnt in a blast of air preheated to 900 to 1,300 °C [2]
- Conversion
- Chemical energy of carbon becomes heat and reducing gas that turn ore into molten iron
- Efficiency
- Around 1830 a Swedish charcoal furnace used 100 to 130 hl of charcoal per tonne of pig iron [3]
- Unit
- hl/t
- Note
- Neilson's hot blast of 1828 greatly improved fuel efficiency by preheating the air [2].
as of 2026-11-10
Energy links
The energy sources and technologies it uses, holds, converts, loses or gets back
Consumes- Ht Heat The furnace runs hot and continuously for long periods [1].
- FW Firewood and charcoal supply Charcoal fuelled blast furnaces until coke took over [4].
- CDQ Steel plant energy recovery In modern steelworks part of the furnace's energy can be won back from its hot, combustible top gas.
as of 2026-11-10
Sources
- Introduction to the archaeometallurgy of iron (Donald B. Wagner) donwagner.dk, 2024
- Wikipedia: Blast furnace
- The blast furnace in earlier times Jernkontoret (Swedish Iron and Steel Producers' Association)
- Coalbrookdale's Old Furnace presented with 100th Engineering Heritage Award Institution of Mechanical Engineers, 2014