Material Insights · Understanding the Material World

Carbon capture and storage: Overview

What it does

The job the technology does for people, in a short paragraph

Carbon capture and storage stops carbon dioxide from a gas plant, power station or factory reaching the air by catching it and burying it deep underground. It began in Texas in 1972 to supply carbon dioxide for oil recovery, and Sleipner in Norway began dedicated offshore storage in 1996 [1]. In early 2025 just over 50 million tonnes a year of capacity was operating worldwide [2].

as of 2026-11-11

How it works

The working principle in plain words, step by step

Most plants use a liquid solvent, often an amine, a chemical related to ammonia that binds carbon dioxide weakly. The waste gas bubbles up through a tall tower while the solvent trickles down and takes up the carbon dioxide. The loaded solvent is pumped to a second tower and heated with steam, which breaks the weak bond and releases nearly pure carbon dioxide; the cooled solvent goes back to the first tower. The carbon dioxide is compressed until it is dense like a liquid, then sent by pipeline or ship. At the storage site wells inject it deep into porous sandstone or a saline rock layer, sealed above by tight shale. Over time some dissolves in the brine and some turns to minerals.

as of 2026-11-11

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
Capture and storage capacity in operation50Mt CO2 per year (just over)2025[2]
Capture capacity expected by 2030 from the project pipeline430Mt CO2 per year (around)2030[2]
Share of operating capture capacity at natural gas processing plants60% (more than)2025[2]
Storage at Sleipner, the first offshore project1Mt CO2 per year2021[1]
US tax credit for stored carbon dioxide85USD per tonne2026[3]

as of 2026-11-11. The 2030 figure is a projection of announced projects, not a forecast of what will be built [2]. The Sleipner and tax credit rows carry the publication years of their sources (2021 and 2026), not data years.

Where it is used

The main places and products the technology is found in

  • Natural gas processing, where carbon dioxide must be removed anyway [2]
  • Enhanced oil recovery fields in Texas and elsewhere [1]
  • Coal power stations such as Boundary Dam in Canada [1]
  • Cement plants, such as the large project in Norway [2]
  • Hydrogen, fertiliser and chemical plants

as of 2026-11-11

Scale today

How much of it there is now: units in use, made each year and who uses it

Installed
Just over 50 Mt CO2 per year of capture and storage capacity in operation [2]
Unit
Mt CO2 per year
Year
2025
Note
IEA count as of the first quarter of 2025; it is capacity, and actual amounts captured can be lower.

as of 2026-11-11

Sources

  1. Appendix C: CCUS Project Summaries (Meeting the Dual Challenge: A Roadmap to At-Scale Deployment of Carbon Capture, Use, and Storage, updated 12 March 2021) National Petroleum Council, hosted by US Department of Energy, 2021
  2. CCUS projects around the world are reaching new milestones International Energy Agency (Carl Greenfield and Josephine Tweneboah Koduah), 2025
  3. Policy and financing momentum sustain CCUS progress despite setbacks International Energy Agency (Carl Greenfield and Paulina Rosales), 2026