Material Insights · Understanding the Material World

Chlor-alkali electrolysis: Overview

What it does

The job the technology does for people, in a short paragraph

Chlor-alkali electrolysis passes electricity through brine to make chlorine, caustic soda and hydrogen together [1]. The first industrial unit ran at Griesheim in 1890 [2]. World capacity was about 77 million t of chlorine a year in 2012 [3]. Chlorine goes into PVC and water treatment [6], and caustic soda into many other industries.

as of 2026-11-11

How it works

The working principle in plain words, step by step

Salt dissolved in water splits into sodium ions and chloride ions. Two electrodes are dipped into the brine and a direct current is passed between them. At the positive electrode, the anode, chloride ions give up electrons and pair up as chlorine gas. At the negative electrode, the cathode, water takes up electrons and gives hydrogen gas, leaving hydroxide ions. With the sodium ions they form caustic soda (sodium hydroxide). The products must be kept apart, or chlorine and caustic soda react with each other. Old plants did this with a mercury cathode or an asbestos diaphragm; most plants today use a membrane that lets only sodium ions pass [1].

as of 2026-11-11

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
World chlorine production capacity76.8million t per year2012[3]
DC electricity per tonne of chlorine, typical bipolar membrane plant2600kWh/t2010[3]
Mercury cells' share of world chlorine capacity, up to7%2012[3]
Electricity share of production cost, at least50%2017[4]
Share of chlorine used to make PVC20%– [6]

as of 2026-11-11. The electricity figures are Euro Chlor typical values of 2010 quoted in the 2014 EU reference document, for the bipolar design (2,860 kWh/t for monopolar) [3]. For the cost share, 2017 is the article's publication year, not a data year [4].

Where it is used

The main places and products the technology is found in

  • Chlorine for PVC plastic [6]
  • Chlorine for treating drinking water and swimming pools [6]
  • Caustic soda for alumina, pulp and paper, soaps and chemicals
  • Hydrogen, a by-product, used as fuel or feedstock

as of 2026-11-11

Scale today

How much of it there is now: units in use, made each year and who uses it

Installed
about 77 million t a year of chlorine capacity worldwide in 2012 [3]; Euro Chlor members alone hold about 11 million t [7]
Unit
t of chlorine a year
Year
2012
Note
Capacity, not output. Chlorine and caustic soda are made together, so chlorine capacity also measures caustic soda capacity.

as of 2026-11-11

Sources

  1. The Chlor-Alkali Process INEOS Electrochemical Solutions
  2. Chemische Fabrik Griesheim - Pioneer of Electrochemistry Journal of Business Chemistry, May 2006 (Dieter Wagner), 2006
  3. Best Available Techniques (BAT) Reference Document for the Production of Chlor-alkali European Commission JRC, 2014, section 1 (world capacity, 2012); Table 2.2 (membrane cell electricity)
  4. The Greening of Chlor-Alkali Production Chemical Engineering (Gerald Ondrey), 2017
  5. Chlorine Royal Society of Chemistry, Periodic Table
  6. Our industry Euro Chlor, 2026