Chlor-alkali electrolysis: Science
Principles
The science it rests on, with why each principle matters to it
Relies on- Faraday's laws of electrolysis Faraday's laws of 1833 tie the amount of chlorine and caustic soda made to the electric charge passed [1].
- The electrochemical cell The cell voltage needed to split brine, plus losses, sets electricity use: about 2,600 to 2,860 kWh of DC power per tonne of chlorine in typical membrane plants [3].
as of 2026-11-11
Discoveries
The discoveries that made it possible: when, by whom and what was found
| Year | Who | What |
|---|---|---|
| 1774 | Carl Wilhelm Scheele, Uppsala | First makes chlorine gas [6] |
| 1800 | William Cruikshank | Makes chlorine from brine by electrolysis [1] |
| 1810 | Humphry Davy | Shows that chlorine is an element [6] |
| 1833 | Michael Faraday | Laws of electrolysis linking current to the amount of substance decomposed [1] |
as of 2026-11-11
The science explained
The science behind it explained for a curious reader
Salt water is full of charged particles: positive sodium and negative chloride. Put two metal plates in it and connect a battery, and each plate pulls the opposite charge towards it, like magnets sorting a heap of pins. At the positive plate, chloride gives up its extra electron and leaves as chlorine gas. At the negative plate, water grabs electrons, gives off hydrogen and leaves hydroxide behind, which pairs with sodium as caustic soda. Faraday showed in 1833 that the amount made follows the charge passed [1], so every tonne of chlorine needs a fixed amount of electricity, and a voltage on top to drive it.
as of 2026-11-11
Sources
- The Chlor-Alkali Process INEOS Electrochemical Solutions
- Best Available Techniques (BAT) Reference Document for the Production of Chlor-alkali European Commission JRC, 2014, section 1 (world capacity, 2012); Table 2.2 (membrane cell electricity)
- Chlorine Royal Society of Chemistry, Periodic Table