Material Insights · Understanding the Material World

Coke ironmaking

Smelting iron with coke from coal instead of charcoal freed iron output from the limits of forests.

Making materials · Metals · No. 9

  • Medieval and early modern
  • Readiness 9 of 9
  • Process
Making materials · Technology

Swapping charcoal for baked coal in 1709 cut iron free from the forests and fed the Industrial Revolution.

Chart: Illustration: Coke ironmaking

Where it comes from

Chart: Map of where it comes from

As iron output grew, wood for charcoal became scarce. Abraham Darby, born to a Quaker family and trained in brass and copper, leased a furnace at Coalbrookdale in 1708 and smelted iron with coke from 1709.

Three things to know
  1. Darby smelted iron with coke at Coalbrookdale from 1709, and his iron went into pots and other hollow ware.
  2. At first Darby's coke iron was unsuitable for refining into wrought iron, so forges kept using charcoal iron.
  3. By 1758 more than 100 cylinders for Newcomen steam engines had been cast at Coalbrookdale.
The journey
  1. 1 Coking coalMined coal of the right kind is crushed and blended
  2. 2 Coke ovenThe coal is heated without air, driving off gas and tar
  3. 3 CokeA hard, porous lump of nearly pure carbon is left
  4. 4 Blast furnaceCoke burns with the blast and strips oxygen from the ore
  5. 5 Hot metalMolten iron saturated with carbon is tapped for steel or castings
Go deeper pick a tab to open it in full