Coke ironmaking: Energy footprint
Energy in use
The energy it uses or converts while it works, and how efficiently
- Consumption
- Coke made from coking coal, about 800 kg of coal per tonne of crude steel on the route [6]
- Conversion
- Chemical energy of carbon becomes heat and carbon monoxide that reduce and melt the ore
- Unit
- kg/t
- Note
- Neilson's hot blast stove of 1828 preheats the air blown into the furnace [4].
as of 2026-11-10
Energy links
The energy sources and technologies it uses, holds, converts, loses or gets back
Consumes- CM Coal mining Coke is made from mined coking coal; the route uses about 800 kg of coal per tonne of crude steel [6].
- Ht Heat Coke ovens and the furnace run continuously at high temperature.
- CDQ Steel plant energy recovery The gas driven off in coke ovens and the furnace top gas can be burnt for heat and power in the works.
as of 2026-11-10
Sources
- Iron processing Encyclopaedia Britannica
- Fact sheet: Steel and raw materials World Steel Association (copy hosted by Australian Steel Institute), 2018