Material Insights · Understanding the Material World

Cross-laminated timber

Layers of boards glued crosswise make large solid wood panels for multi-storey buildings.

Building and shelter · Structures · No. 219

  • Digital age
  • Readiness 9 of 9
  • Component
Building and shelter · Technology

Glue boards in crossing layers and wood becomes a stiff panel strong enough to frame an 86 m tower.

Chart: Illustration: Cross-laminated timber

Where it comes from

Chart: Map of where it comes from

Early work took place in Switzerland in the early 1990s. In Austria, Gerhard Schickhofer's 1994 thesis at TU Graz led to an industry and university effort and the first factory, opened by KLH in 1999.

Three things to know
  1. Crossing the layers makes a panel that is strong and stable in both directions, unlike a single board that is strong only along its grain.
  2. Panels usually have three to seven layers, always an odd number, so they stay symmetrical about the middle.
  3. Output in German-speaking countries, Italy and the Czech Republic rose 4% to a record 1.27 million cubic metres in 2023.
The journey
  1. 1 ForestSpruce and other softwoods are felled and sawn into boards
  2. 2 Drying and gradingBoards are kiln-dried and sorted by strength
  3. 3 Lay-upLayers of boards are laid at right angles with glue between them
  4. 4 PressingA press bonds the stack into one solid panel
  5. 5 CuttingComputer-controlled machines cut openings and joints
  6. 6 SiteCranes lift the finished panels into place as walls and floors
Covered in Structures and materials: stress, stiffness, strength and why things breakEngineering
Go deeper pick a tab to open it in full