Material Insights · Understanding the Material World

Cross-laminated timber: Science

Principles

The science it rests on, with why each principle matters to it

Relies on
  • Beam theory A floor panel bends like a wide beam; the outer layers, laid along the span, carry most of the bending stress.
  • Hooke's law of elasticity Wood stretches and bends elastically under working loads, so engineers can size panels from the stiffness of each layer.
Limited by
  • Combustion chemistry Wood burns, which is why building rules limit timber height; thick panels char on the surface, and the char slows burning of the wood inside.

as of 2026-11-11

Discoveries

The discoveries that made it possible: when, by whom and what was found

YearWhoWhat
1638Galileo GalileiPosed the problem of the loaded beam, founding the mathematical study of elasticity [8]
1678Robert HookePublished the law that a spring's force grows with its stretch [9]
1744Leonhard EulerGave the complete solution for the bent elastic strip [8]

as of 2026-11-11

The science explained

The science behind it explained for a curious reader

Wood is a bundle of hollow fibres running along the trunk, like a pack of drinking straws glued together. Pull or bend along the straws and it is strong; push across them and they part easily. A sheet of paper shows the same weakness, while plywood does not, because its thin veneers cross. CLT applies the plywood idea at building scale with whole boards. Each crosswise layer stops its neighbours from splitting and from swelling across the grain. In a floor, the outer layers run along the span and do most of the work in bending, as beam theory, built up from Galileo's question of 1638 to Euler's treatment of bent elastic strips in 1744, predicts [8]. The inner crossing layers keep the panel stable, carry loads sideways and hold screws.

as of 2026-11-11

Sources

  1. The elastica: a mathematical history Raph Levien, Technical Report UCB/EECS-2008-103, Electrical Engineering and Computer Sciences, University of California at Berkeley, 2008
  2. Introducing Laws of Physics American Institute of Physics