Material Insights · Understanding the Material World

Beam theory

How beams bend and carry loads, the basis for sizing frames, bridges and floors.

Physics · Classical mechanics · No. 14

  • Medieval and early modern
  • Science
Physics · The science behind technology

Jacob Bernoulli's 1694 law of the bent strip was right about curvature but put the unstretched line in the wrong place, on its inner face.

Chart: Illustration: Beam theory

Where it comes from

Chart: Map of where it comes from

Galileo worked on the strength of a loaded beam in 1638. Jacob Bernoulli in Basel published his law of the bent elastic strip in 1694, and Euler gave the complete solution in 1744.

Three things to know
  1. In a bent beam the curvature at each point is in proportion to the bending moment there, and inversely to the beam's stiffness.
  2. In an October 1742 letter, Daniel Bernoulli suggested the problem to Euler, who solved it in 1744.
  3. The simple theory assumes small deflections and that flat cross-sections stay flat as the beam bends.
The journey
  1. 1 ProblemGalileo asks how strong a beam loaded at one end is, 1638
  2. 2 Bending lawJacob Bernoulli ties the bend to the moment of the load, 1694
  3. 3 LetterDaniel Bernoulli suggests a way into the general problem, 1742
  4. 4 SolutionEuler publishes the complete theory of the bent strip, 1744
  5. 5 Use todaySizing every floor joist, girder, frame and bridge deck
Covered in Structures and materials: stress, stiffness, strength and why things breakEngineering
Go deeper pick a tab to open it in full