Material Insights · Understanding the Material World

Beam theory: The idea

In plain words

The idea explained without jargon

Put a load on a plank across a stream and it sags. The top of the plank is squeezed and the bottom is stretched, while a line through the middle, the neutral axis, is neither [1]. The more the load tries to bend the plank, the more sharply it curves: the curvature at each point is in proportion to the bending moment there [1, 2]. How much a beam resists depends on two things: the stiffness of its material and the shape of its cross-section [1]. Material far from the middle does most of the work, which is why a tall beam is much stiffer than a flat one, and why beams are often made with wide flanges top and bottom [1].

as of 2026-11-10

Key equation

The equation that sums it up, and what each symbol means

Equation
M = E I kappa, and sigma = M y / I
Symbols
{"M":"the bending moment at a point of the beam, in newton metres","E":"the material's stiffness (Young's modulus), in pascals","I":"the second moment of area of the cross-section, which grows with depth cubed for a rectangle, in metres to the fourth power","kappa":"the curvature of the bent beam, one over the radius of the bend, per metre","sigma":"the stress in the beam at distance y from the neutral axis, in pascals","y":"the distance from the neutral axis, in metres"}
Note
Course notes write these as curvature = M / (E I) and sigma = -M y / I, the minus sign meaning compression above the neutral axis [1]. They hold for small deflections when flat cross-sections stay flat as the beam bends [1]. The first is the modern form of Jacob Bernoulli's idea that the bend follows the moment of the load [2].

as of 2026-11-10

An analogy

A picture from everyday life that makes the idea easier to hold

Bend a thick paperback book and watch its edges: the pages on the outside of the curve slide past those on the inside. Glue the pages together and the book becomes much stiffer, because the outside layers must now stretch and the inside ones squash. The picture stops being true for a solid beam, which has no pages and is stretched and squeezed smoothly through its depth.

as of 2026-11-10

Sources

  1. Stresses in Beams David Roylance, Department of Materials Science and Engineering, MIT (MIT OpenCourseWare, 3.91 Mechanical Behavior of Plastics), 2000
  2. The elastica: a mathematical history Raph Levien, Technical Report UCB/EECS-2008-103, Electrical Engineering and Computer Sciences, University of California at Berkeley, 2008