Crucible steel
Iron melted with carbon in a sealed crucible gives a uniform, hard steel.
Making materials · Metals · No. 391
- Ancient
- Readiness 9 of 9
- Process
For centuries prized steel came from small clay pots; in India each pot was broken open to free a single ingot.
Chart: Illustration: Crucible steel
Where it comes from
Chart: Map of where it comes from
Greek writers knew of swords of Indian steel by the late fifth century BC. Furnaces stacked with crucibles at Kodumanal in South India, about the third century BC, may have made it, but where the process began is still unknown.
Three things to know
- A typical wootz ingot analysed in 1804 held about 1.3% carbon, far more than wrought iron's under 0.5%.
- Each Indian ingot came from its own single-use crucible.
- Bessemer steel made mass-produced crucible steel obsolete by the 1870s, but Sheffield's last commercial melt was in 1971.
The journey
- 1 IronLow-carbon bloomery iron, or broken blister steel in Sheffield
- 2 ChargeSealed in a clay crucible with a carbon source such as plant matter or cast iron
- 3 FurnaceHeated for hours until the charge melts into uniform steel
- 4 IngotCooled into a cake or ingot; Indian crucibles were used only once
- 5 ForgingWorked into blades, tools and springs