Crucible steel: Materials
Materials it needs
The commodities and chemicals it needs per unit, its share of each one's demand and how critical each is
Needs- Kao Kaolin & clays criticality low Crucible clay was trodden, moulded and dried on site in Sheffield [3], and each Indian ingot used its own single-use crucible [2].
- Kc Coking coal criticality low Sheffield crucible furnaces burned coke, stored in buildings beside them [3].
- St Steel criticality low Sheffield crucibles melted broken blister steel into uniform cast steel [3].
as of 2026-11-11. No source opened gives material amounts per tonne of steel; criticality is the writer's judgement for a historical process using common materials.
Critical materials
The materials whose supply could hold it back
- No scarce material limited it; fuel and crucibles did, because each Indian ingot needed its own crucible [2].
- Sheffield works made their crucibles on site from clay, so good refractory clay was a daily need [3].
as of 2026-11-11
Sources
- A journey of over 200 years: early studies on wootz ingots and new evidence from Konasamudram, India (Jaikishan, Desai and Rehren, Advances in Archaeomaterials, accepted manuscript) UCL Discovery, 2021
- Archaeology Datasheet 302: Steelmaking Historical Metallurgy Society, 2010