Material Insights · Understanding the Material World

Direct air capture: Overview

What it does

The job the technology does for people, in a short paragraph

Direct air capture takes carbon dioxide out of ordinary air so it can be stored underground or used to make fuels. Klaus Lackner first proposed it as a climate measure in 1999 [1], and the first commercial plant opened in Switzerland in 2017 [2]. It is still tiny: the 27 plants the IEA counted, before the larger Mammoth plant opened in 2024, captured almost 0.01 Mt of carbon dioxide a year in all [3][8].

as of 2026-11-11

How it works

The working principle in plain words, step by step

Fans push air through contactors that hold a substance which grabs carbon dioxide. Solid systems use sorbent filters that bind the gas at air temperature; once full, they are heated to 80 to 120 °C under a vacuum and give off pure carbon dioxide [3]. Liquid systems wash the air with a potassium hydroxide solution, which turns the gas into carbonate; a calcium loop and hot units at 300 to 900 °C then release it [3][6]. The pure gas is compressed and either used or injected into rock: at Orca it goes into basalt, where it turns to stone [7]. Air holds only about 420 to 430 parts per million of carbon dioxide, so huge volumes must pass through [4].

as of 2026-11-11

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
Nameplate capture capacity of Mammoth, the largest plant36,000t CO2 per year2024[8]
Capture capacity of Orca, Iceland4000t CO2 per year2021[7]
Estimated cost of current projects, low end of a range up to USD 1,900500USD/t CO22025[4]
Natural gas needed by one published liquid design, at 15 MPa delivery8.81GJ/t CO22018[6]
United States tax credit for carbon dioxide stored permanently, upper limit180USD/t CO22022[3]

as of 2026-11-11. The cost range is dated 2025, the publication year of the IEA commentary, not a stated data year [4]; the 8.81 GJ figure is for one 1 Mt a year design, not a measured average [6].

Where it is used

The main places and products the technology is found in

  • Carbon removal sold to companies through the voluntary carbon market [3]
  • Storage in basalt rock in Iceland, where the gas turns to stone [7]
  • Carbon dioxide for greenhouses that grow vegetables [2]
  • Feedstock for low-emission synthetic hydrocarbon fuels [3]

as of 2026-11-11

Scale today

How much of it there is now: units in use, made each year and who uses it

Installed
27 plants commissioned worldwide, capturing almost 0.01 Mt CO2 a year in all [3]; the largest since then, Mammoth, is rated at up to 36,000 t a year [8]
Unit
t CO2 per year
Year
2024
Note
The IEA page gives no date for its count; it mentions events of February 2024 and still expects the Iceland plant of 36 kt a year to come online in 2024, so the count is from early 2024 (inferred, not a stated data year) [3]. Mammoth started in May 2024 [8]. Plans for at least 130 plants are at various stages [3].

as of 2026-11-11

Sources

  1. Direct air capture: A little history (Geoffrey Ozin) Advanced Science News (Wiley), 2022
  2. The world's first commercially operational plant capturing CO2 from the atmosphere Umweltbundesamt (German Environment Agency), environmental chronicle
  3. Direct Air Capture International Energy Agency
  4. Driving down the cost of carbon removal: Why innovation matters (Carl Greenfield, Simon Bennett, Timur Gul) International Energy Agency, 2025
  5. A Process for Capturing CO2 from the Atmosphere (Keith, Holmes, St. Angelo and Heidel, Joule) Belfer Center, Harvard Kennedy School, 2018
  6. The world's largest direct air capture and CO2 storage plant is ON Carbfix, 2021
  7. Climeworks switches on world's largest direct air capture plant (press release) Climeworks, 2024