Material Insights · Understanding the Material World

Direct air capture: Energy footprint

Energy in use

The energy it uses or converts while it works, and how efficiently

Consumption
Heat and electricity; the 2018 liquid design needs 8.81 GJ of natural gas, or 5.25 GJ of gas and 366 kWh of electricity, per tonne [6]
Conversion
Heat and work separate carbon dioxide from air and compress it; no useful energy comes out
Unit
GJ/t CO2
Note
The thermodynamic minimum is about 20 kJ per mole [5]; both solid and liquid systems can be built to run on heat only or electricity only [3].

as of 2026-11-11

Energy links

The energy sources and technologies it uses, holds, converts, loses or gets back

Consumes
  • Ht Heat Solid sorbents are heated to 80 to 120 °C to release the gas, and liquid systems use units at 300 to 900 °C [3].
  • El Electricity Fans and compressors run on electricity; one liquid design can use 366 kWh per tonne with less gas [6].
  • GeP Geothermal power plants ON Power supplies Mammoth with geothermal energy [8].

as of 2026-11-11

Sources

  1. Direct Air Capture International Energy Agency
  2. Economic and energetic analysis of capturing CO2 from ambient air (House, Baclig, Ranjan, van Nierop, Wilcox and Herzog, PNAS 108(51), 20428 to 20433) DSpace@MIT (MIT Libraries), 2011, abstract; the 20 kJ/mol minimum is in the main text (Eq. 2)
  3. A Process for Capturing CO2 from the Atmosphere (Keith, Holmes, St. Angelo and Heidel, Joule) Belfer Center, Harvard Kennedy School, 2018
  4. Climeworks switches on world's largest direct air capture plant (press release) Climeworks, 2024