Material Insights · Understanding the Material World

Building heat recovery: Overview

What it does

The job the technology does for people, in a short paragraph

A heat recovery ventilator lets a building breathe without throwing away its warmth. Stale air goes out and fresh air comes in through a heat exchanger, and in winter heat moves from the outgoing to the incoming air; in summer the cooler indoor air cools the incoming air [5]. Most units recover between 70 and 90% of the heat in the exhaust air [7]. Air-to-air exchangers were first built into demonstration houses in 1975 and 1977 [2][1], and reached ordinary Swedish homes from 1979 [3].

as of 2026-11-12

How it works

The working principle in plain words, step by step

A tightly built house still needs fresh air, and every litre of air that leaves carries heat with it. A heat recovery ventilator has a heat exchanger, one or more fans and controls [5]. The fans push the outgoing stale air and the incoming fresh air through the exchanger side by side. A thin wall keeps the two streams apart, but heat crosses it, so the cold fresh air arrives pre-warmed in winter and the warm outdoor air is pre-cooled in summer [5][6]. An energy recovery ventilator also passes some water vapour across, which helps hold indoor humidity steady [5]. In cold climates the unit must have devices to prevent frost forming in the exchanger [4].

as of 2026-11-12

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
Share of the heat in exhaust air that most heat recovery ventilators recover, top of the 70 to 90% range90%– [7]
Share of the energy in exiting air that most energy recovery systems recover, top of the 70 to 80% range80%2017[4]
Efficiency of a multiunit heat recovery ventilator in Norwich University's Solar Decathlon house92%2013[6]
Cost of a heat recovery ventilator in recent affordable housing buildings, or less3000USD per unit– [8]

as of 2026-11-12. The 70 to 80% carries 2017, the year of the archived copy of the Department of Energy page; the 70 to 90% and the 3,000 dollars come from pages with no date [7][8]. The 92% is the Solar Decathlon 2013 house's own figure [6].

Where it is used

The main places and products the technology is found in

  • Low-energy houses, such as the 1977 Saskatchewan Conservation House in Regina [1]
  • Multifamily and affordable housing, where recent buildings use heat recovery ventilators [8]
  • Swedish dwellings, where heat recovery from ventilation air began in late 1979 [3]
  • Cold-climate homes, where the unit must have devices to prevent frost forming in the exchanger [4]

as of 2026-11-12

Scale today

How much of it there is now: units in use, made each year and who uses it

Unit
units
Note
No source opened gives a count of installed heat recovery ventilators or a market size. The Department of Energy calls them most cost-effective in climates with extreme winters or summers and where fuel costs are high [4].

as of 2026-11-12

Sources

  1. Energy-efficient Houses Encyclopedia of Saskatchewan, University of Regina
  2. The History of Superinsulated Houses in North America (Holladay, British Columbia Building Envelope Council) Usable Buildings, 2010
  3. Exhaust air heat recovery in buildings (Fehrm, Reiners and Ungemach, International Journal of Refrigeration 25) International Journal of Refrigeration, copy on the NTNU wiki, 2002
  4. Whole-House Ventilation (Energy Saver, archived) US Department of Energy, via the University of North Texas web archive
  5. HVAC energy recovery ventilation (Energy Basics) US DOE Building Science Education
  6. Technology Spotlight: Energy-Recovery Ventilation Systems (Solar Decathlon 2013 houses) US DOE Solar Decathlon, 2013
  7. Heat Recovery Ventilators and Energy Recovery Ventilators Cold Climate Housing Research Center
  8. Balanced Ventilation with Heat Recovery for multifamily housing Housing Development Consortium, Exemplary Buildings Program