Material Insights · Understanding the Material World

Energy in buildings: Overview

What it does

The job the technology does for people, in a short paragraph

Buildings use energy to keep people warm or cool, heat water, cook, light rooms and run appliances. Edison's Pearl Street station in New York, opened in 1882, was the first permanent central power station to light buildings [1]. In 2021 running the world's buildings took 30% of final energy use and caused 27% of energy-sector emissions [2].

as of 2026-11-10

How it works

The working principle in plain words, step by step

A building is a box that leaks heat. In winter heat flows out through walls, roof, windows and gaps, faster when it is colder outside and slower behind good insulation; in summer heat flows in. A heating system makes up the loss by burning gas or oil in a boiler, running a heat pump or passing current through a resistance. Air conditioners pump heat back out. Hot water, cooking, lighting and appliances add their own demand, most of it met with electricity. Insulation, airtight construction and heat recovery from stale air cut the losses, so less energy buys the same comfort. The first passive house, in Darmstadt, has been lived in since 1991 and in 2006 was using only about 10 kWh of heat per square metre a year [5].

as of 2026-11-10

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
Buildings' share of world final energy use (operation)30%2021[2]
Buildings' share of energy-sector emissions, direct and indirect27%2021[2]
Buildings and construction share of global energy consumption (operation plus construction)32%– [3]
Renewable share of the heat used in buildings16%2024[7]
Energy transfer efficiency of an induction hob85%– [6]
Energy transfer efficiency of a gas hob32%– [6]

as of 2026-11-10. The IEA figure counts the operation of buildings only, while UNEP's 2024/2025 report adds construction, so the two shares differ; UNEP's summary page states no data year [3]. The hob figures are ENERGY STAR's for its 2021 to 2022 award [6].

Where it is used

The main places and products the technology is found in

  • Space heating with boilers, heat pumps and electric heaters
  • Cooling with air conditioners and fans
  • Hot water for washing and bathing
  • Cooking on gas, electric and induction hobs
  • Lighting, appliances and electronics
  • The building envelope: insulation, glazing and airtight construction that keep heat in or out

as of 2026-11-10

Scale today

How much of it there is now: units in use, made each year and who uses it

Users
running buildings took 30% of world final energy (2021) [2]
Unit
share of world final energy
Year
2021
Note
Counts the energy to operate buildings; UNEP counts buildings and construction together at 32% of global energy and 34% of CO2 emissions [3].

as of 2026-11-10

Sources

  1. Milestones: Pearl Street Station, 1882 IEEE History Center (Engineering and Technology History Wiki)
  2. IEA Tracking Report - Buildings Global Alliance for Buildings and Construction (reporting the IEA), 2022
  3. Global Status Report for Buildings and Construction 2024/2025 United Nations Environment Programme, 2025
  4. 10 Years Conference on Passive Houses Passive House Institute, 2006
  5. 2021 ENERGY STAR Emerging Technology Award: Residential Induction Cooking Tops US EPA ENERGY STAR, 2021
  6. Renewables 2025: Renewable heat IEA, 2025