Material Insights · Understanding the Material World

District heating and cooling networks: Overview

What it does

The job the technology does for people, in a short paragraph

A district heating network makes heat at a few central plants and pipes it to many buildings, so each one needs no boiler of its own. District cooling does the same with chilled water. The first commercial system was built in Lockport, New York, in 1877 [1]. In 2018 district heating and cooling met a little under 6% of the world's heat use, with large shares in Russia and China [2].

as of 2026-11-11

How it works

The working principle in plain words, step by step

A central plant heats water, or in the oldest systems makes steam [3]. Pumps push it through a buried supply pipe to each building. There a heat exchanger in a small substation passes the heat to the building's own radiators and taps, and the cooled water returns through a second pipe to be heated again. The pipes are the costly part. A modern pre-insulated pipe is a steel inner pipe wrapped in polyurethane foam inside a polyethylene casing [4]. Heat still leaks through the foam, so the cooler the water, the smaller the loss: running a network at 55 °C out and 25 °C back instead of 80 °C and 45 °C would cut distribution losses by about 43% [4]. Cooler networks also make it easier to take in surplus industrial heat, geothermal and solar heat [3].

as of 2026-11-11

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
Share of global heat consumption met by district heating and cooling (a little under)6%2018[2]
Share of China's heat consumption met by district heating8%2018[2]
Share of renewables in the energy used for district heating (less than)8%2018[2]
District heating systems installed in the United States (more than)50systems1890[1]
Cut in distribution heat losses from running at 55/25 °C instead of 80/45 °C43%2023[4]

as of 2026-11-11. The IEA figures are for 2018, from its Renewables 2019 analysis (the article itself shows no date) [2]. The 43% is a worked design example in the European Commission's guide, which states no data year; 2023 is the page's publication year (13 March 2023), not a data year [4].

Where it is used

The main places and products the technology is found in

  • City centres with dense blocks of flats and offices, the first use in Lockport and other large US cities [1][6]
  • Northern China and Russia, where district heating meets a large share of heat demand [2]
  • Low-temperature networks fed by industrial surplus heat, data centres, geothermal and solar heat [3][4]
  • District cooling, which pipes chilled water instead of hot water

as of 2026-11-11

Scale today

How much of it there is now: units in use, made each year and who uses it

Users
Buildings in cities with networks; district heat meets more than one third of Russia's heat consumption, and met 8% of China's in 2018 [2]
Unit
% of heat consumption
Year
2018
Note
No world count of networks or pipe length was found in the sources opened; district heating and cooling met a little under 6% of global heat consumption in 2018 [2].

as of 2026-11-11

Sources

  1. The road to Lockport: Historical background of district heating and cooling University of Rochester, conference record CONF-950104 (on US DOE OSTI)
  2. How can district heating help decarbonise the heat sector by 2024? (from Renewables 2019) International Energy Agency (IEA), 2019
  3. Progression of District Heating: 1st to 4th generation Aalborg University (Thorsen, Lund, Mathiesen), 2018
  4. Distribution technologies for low-temperature district heating (LTDH) European Commission, Smart Cities Marketplace, 2019
  5. #122 Holly District Heating System American Society of Mechanical Engineers (ASME), Landmarks