District heating and cooling networks: Materials
Materials it needs
The commodities and chemicals it needs per unit, its share of each one's demand and how critical each is
Needs- St Steel criticality low Conventional pre-insulated pipes have a steel service pipe [4].
- Cu Copper criticality low Some flexible pipes for low-temperature networks have copper service pipes [4].
- PU Polyurethanes (MDI, TDI, polyols) criticality low The steel pipe is insulated with polyurethane foam, whose ageing with temperature is governed by the EN 253 standard [4].
- HDPE High-density polyethylene criticality low A polyethylene (HDPE) casing pipe protects the insulation [4].
as of 2026-11-11. No source opened gives amounts per km or per MW; criticality is a judgement, since all these materials are made in large amounts for other uses.
Critical materials
The materials whose supply could hold it back
- No scarce material holds district heating back; the pipes are steel, polyurethane foam and polyethylene [4].
- Temperature, not supply, limits pipe life: networks for high temperatures must endure 120 °C continuously for 30 years, and the foam's bond ages faster when hotter [4].
as of 2026-11-11
Sources
- Distribution technologies for low-temperature district heating (LTDH) European Commission, Smart Cities Marketplace, 2019