Material Insights · Understanding the Material World

Engine exhaust recovery: Overview

What it does

The job the technology does for people, in a short paragraph

Engine exhaust recovery puts the hot, fast gas leaving an engine back to work. A turbocharger spins a turbine in the exhaust to drive a compressor that packs more air into the cylinders. Alfred Buchi patented the idea in 1905 [1] and the first turbocharged ships were launched in 1926 [1]. Volvo claims its turbo-compound truck engine alone saves up to 6.5% of fuel [3].

as of 2026-11-12

How it works

The working principle in plain words, step by step

Exhaust leaves the cylinders hot and under pressure, so it can spin a turbine directly. Engine exhaust typically runs at 700 to 1,000°F (about 370 to 540°C), while the engine's other heat streams are under 300°F [2]. In a turbocharger the turbine wheel shares a shaft with a compressor wheel. The compressor squeezes the intake air, so each cylinder holds more oxygen and can burn more fuel per stroke, and a smaller engine gives the same power. Turbo-compounding adds a turbine that turns exhaust energy into extra engine output [3]. Turbine wheels sit in the hot gas, so they have long been cast from a nickel-based alloy, INCONEL 713C [6].

as of 2026-11-12

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
Top of the typical engine exhaust temperature range, 700 to 1,000°F1000°F2023[2]
Highest heavy-duty diesel brake thermal efficiency shown, the benchmark exhaust recovery works against53.09%2024[4]
Volvo's claimed fuel efficiency gain from its D13 Turbo Compound engine alone, up to6.5%2017[3]
Turbochargers produced by one maker, Accelleron, in the year, more than22,000turbochargers2025[5]
Engines in service or on order with Buchi turbochargers79engines1929[1]

as of 2026-11-12. The 6.5% is a vendor claim for the engine alone; Volvo's 7.5% headline adds 1% from truck aerodynamics [3]. Its year is that of the press release (filed under July 2017 on Volvo's site), and the exhaust range's year is the fact sheet's publication year (2023) [2]; neither source gives a data year.

Where it is used

The main places and products the technology is found in

  • Long-haul trucks, where Volvo's D13 Turbo Compound engine adds a turbine to the exhaust [3]
  • Ships, where the first turbocharged engines went into service in 1926 [1]
  • Aircraft piston engines, where small exhaust turbochargers were in use in France and the USA by 1920 [1]
  • Reciprocating engines in combined heat and power plants, where exhaust is roughly half of the recoverable heat [2]

as of 2026-11-12

Scale today

How much of it there is now: units in use, made each year and who uses it

Made per year
over 22,000 turbochargers by one maker, Accelleron [5]
Users
Engine makers and operators of ships, trucks and power plants
Unit
turbochargers
Year
2025
Note
No world total found. Accelleron's 2025 revenue was USD 1.263 billion and the energy sector is more than 40% of it [5].

as of 2026-11-12

Sources

  1. The innovations behind the turbocharged diesel engine Institute of Marine Engineering, Science and Technology (IMarEST), John Barnes, 2021
  2. Reciprocating Engines, CHP Technology Fact Sheet Series (DOE/EE-2764) US Department of Energy, 2023
  3. Volvo D13 Turbo Compound Engine Powers New Volvo VNL Series to 7.5 Percent Improvement in Fuel Efficiency Volvo Trucks North America (press release, filed under July 2017 on its website)
  4. Weichai unveils diesel engine with 53.09% brake thermal efficiency DieselNet, 2024
  5. Accelleron Annual Report 2025: Company overview Accelleron Industries, 2025
  6. US9738954B2: Turbine wheel of automotive turbocharger and method for producing the same Google Patents (assignee Daido Steel Co., Ltd.), 2017