Engine exhaust recovery: Science
Principles
The science it rests on, with why each principle matters to it
Relies on- Carnot's limit on heat engines Carnot showed in 1824 that an ideal engine's efficiency depends only on its temperature difference [8], which is why hot exhaust at 700 to 1,000°F is worth recovering [2].
- Bernoulli's principle Pressure in a moving fluid falls as its speed rises [9]; in the turbine the exhaust gives up pressure as it speeds through the nozzles and blades.
as of 2026-11-12
Discoveries
The discoveries that made it possible: when, by whom and what was found
| Year | Who | What |
|---|---|---|
| 1738 | Daniel Bernoulli | Hydrodynamica set out the relation between a fluid's speed and its pressure [9] |
| 1824 | Sadi Carnot | Reflections on the Motive Power of Fire, showing that an ideal engine's efficiency depends only on its temperature difference [8] |
| 1849 | James Prescott Joule | Reported to the Royal Society his work on the mechanical equivalent of heat, the base of the first law of thermodynamics [10] |
as of 2026-11-12
Physical limits
The limits nature sets, today's best and how far there is still to go
| Limit | Value | Unit | Best today | Gap |
|---|---|---|---|---|
| Carnot limit for an ideal engine run on exhaust at 700 to 1,000°F (about 644 to 811 K) and rejecting heat at an assumed 288 K (about 15°C) | 64.5 | % | No turbine-only efficiency is given in the sources opened; Volvo claims up to 6.5% lower fuel use for its turbo-compound engine [3] | Calculated estimate: 1 minus 288/811 is about 64.5%, and 1 minus 288/644 is about 55%. This overstates what exhaust can give, because the gas cools as heat is taken from it, and the fuel saving is not on the same basis as the Carnot figure. |
Estimate · as of 2026-11-12. An estimate: the limit is calculated from the exhaust temperatures in [2] and an assumed 288 K surroundings; no source publishes it.
The science explained
The science behind it explained for a curious reader
Hold a pinwheel in front of a fan and it spins: moving air hands over some of its energy. An engine's exhaust is a fan that never switches off, and it is hot and under pressure as well as fast. A turbine is a pinwheel built to survive that gas. As the gas rushes past, its pressure falls as its speed rises [9], and the blades turn. How much work the exhaust can give is capped by its temperature against the surroundings, the limit Carnot found in 1824 [8]. A turbocharger spends all that work on a compressor, so the engine gets denser air. Turbo-compounding spends some of it as extra output instead [3]. The hotter the exhaust, the more there is to take: engine exhaust runs at 700 to 1,000°F, but the engine's other heat streams are under 300°F [2].
as of 2026-11-12
Sources
- Reciprocating Engines, CHP Technology Fact Sheet Series (DOE/EE-2764) US Department of Energy, 2023
- Volvo D13 Turbo Compound Engine Powers New Volvo VNL Series to 7.5 Percent Improvement in Fuel Efficiency Volvo Trucks North America (press release, filed under July 2017 on its website)
- June 12, 1824: Sadi Carnot Publishes Treatise on Heat Engines APS News, American Physical Society, 2009
- Hydrodynamica Encyclopaedia Britannica
- June 1849: James Prescott Joule and the Mechanical Equivalent of Heat APS News, American Physical Society, 2015