Material Insights · Understanding the Material World

Fusion reactors: Overview

What it does

The job the technology does for people, in a short paragraph

A fusion reactor would make electricity by joining light atoms, as the Sun does, with tiny amounts of fuel and no long-lived high-level waste. Research began in 1951 [1], but no machine has yet put power on a grid. Laser fusion first released more energy than the laser delivered to its target in 2022 [2], and private firms raised USD 4.48 billion in the year to July 2026 [7].

as of 2026-11-11

How it works

The working principle in plain words, step by step

The fuel is a mix of deuterium and tritium, two heavy forms of hydrogen. Heated to well over a hundred million degrees, the gas becomes a plasma of bare nuclei moving so fast that they overcome their electric repulsion and fuse into helium, throwing out a very energetic neutron. The hard part is keeping the plasma hot and dense for long enough. Tokamaks and stellarators hold it in a doughnut-shaped magnetic cage made by superconducting coils. Laser fusion instead crushes a pellet of frozen fuel so fast that it fuses before it flies apart. In a power plant the neutrons would be stopped in a surrounding blanket, heating it to raise steam and breeding new tritium from lithium.

as of 2026-11-11

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
Record laser fusion yield (NIF, 7 April 2025)8.6MJ2025[3]
Record target gain, fusion energy over laser energy on target (NIF)4.13ratio2025[3]
Record fusion energy from a tokamak pulse (JET, 3 October 2023)69MJ2023[4, 10]
ITER design target: fusion power from 50 MW of heating (not yet achieved)500MW– [5]
Money raised by private fusion firms in the year to July4.48billion USD2026[7]

as of 2026-11-11. The ITER figure is a design target with no year attached; the page stating it is dated 2023 [5]. Private funding is from the Fusion Industry Association survey reported in July 2026 [7].

Where it is used

The main places and products the technology is found in

  • Research tokamaks such as JET in the UK and ITER, under construction in France
  • Stellarators, such as the Wendelstein machine in Germany
  • Laser fusion at the National Ignition Facility in California
  • Prototype machines built by private fusion companies

as of 2026-11-11

Scale today

How much of it there is now: units in use, made each year and who uses it

Installed
No power plants; research machines only
Users
56 private fusion companies surveyed in 2026 [7]
Unit
fusion companies
Year
2026
Note
Private firms raised USD 14.24 billion over six years to July 2026 [7]. ITER, the largest machine under construction, will weigh 23,000 tonnes [6].

as of 2026-11-11

Sources

  1. Princeton Plasma Physics Laboratory Records Princeton University Library, University Archives
  2. Lawrence Livermore National Laboratory's National Ignition Facility achieves fusion ignition University of California (republished from Lawrence Livermore National Laboratory), 2022
  3. Record-breaking fusion experiments Lawrence Livermore National Laboratory, LLNL Annual Report 2025, National Ignition Facility section
  4. JET's final tritium experiments yield new fusion energy record UK Government (DESNZ / UKAEA), 2024
  5. What will ITER do? ITER Organization, 2025, published 13 November 2023, last modified 21 May 2026
  6. Facts & Figures ITER Organization
  7. Fusion industry raised USD4.5 billion in past year, report says World Nuclear News, 2026
  8. Fusion research facility JET's final tritium experiments yield new energy record EurekAlert! (release issued by EUROfusion), 2024