Material Insights · Understanding the Material World

Geothermal power plants: Overview

What it does

The job the technology does for people, in a short paragraph

Geothermal power plants turn heat from deep underground into electricity that flows day and night, whatever the weather. Wells tap natural reservoirs of steam or hot water, mostly in volcanic and tectonically active regions. Geothermal steam first lit five bulbs at Larderello in Italy in 1904, and the first plant opened there in 1913 [1]. World capacity was about 15.6 GW in 2025 [3]; the United States, Iceland, Indonesia, Türkiye, Kenya and Italy are among the main users [5].

as of 2026-11-11

How it works

The working principle in plain words, step by step

Wells are drilled into a hydrothermal reservoir, a natural zone where water heated by the Earth circulates through the rock [6]. What comes up decides the plant. A dry steam plant sends natural steam straight to a turbine. A flash plant takes very hot water, lets its pressure drop so part of it boils into steam, and drives the turbine with that; the US baseline treats resources at 200 °C or more as flash resources [6]. A binary plant uses cooler water, from 110 to under 200 °C, to boil a second fluid with a lower boiling point in a heat exchanger, and that vapour drives the turbine [6]. In every case the turbine spins a generator. The spent steam is condensed and, with the leftover water, is usually pumped back underground to keep up reservoir pressure.

as of 2026-11-11

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
World installed geothermal power capacity15.6GW2025[3]
World geothermal electricity generation97.7TWh2024[3]
Global weighted-average levelised cost of electricity89USD/MWh2025[4]
Average utilisation rate of world geothermal capacity (more than)75%2023[5]

as of 2026-11-11. The cost is IRENA's global weighted-average levelised cost of electricity for geothermal in 2025, which rose because of lower output rather than higher technology costs [4]. The capacity and generation rows are the headline cells of IRENA's 2026 highlights, which its body text rounds to 16 GW and 98 TWh [3].

Where it is used

The main places and products the technology is found in

  • Grid power in the United States, Iceland, Indonesia, Türkiye, Kenya and Italy, the main users [5]
  • Larderello in Tuscany, where geothermal power began [1]
  • The Geysers in California, where the first large-scale US plant began in 1960 [7]
  • Steady, round-the-clock supply for utilities alongside variable wind and solar

as of 2026-11-11

Scale today

How much of it there is now: units in use, made each year and who uses it

Installed
about 15.6 GW [3]
Users
national grids in volcanic and rift regions; geothermal as a whole meets less than 1% of world energy demand [5]
Unit
GW of generating capacity
Year
2025
Note
Plants generated about 97.7 TWh in 2024 [3], the latest year for generation in IRENA's highlights.

as of 2026-11-11

Sources

  1. First National Museum of Geothermal Energy Inaugurated in Tuscany Enel (press release), 2013, press release dated 30 September 2013
  2. Renewable energy highlights International Renewable Energy Agency (IRENA), 2026, published 14 July 2026; headline blocks "Electricity capacity, Renewables in 2025" and "Electricity generation, Renewables in 2024", matched to the body text (geothermal 16 GW, 98 TWh)
  3. Renewable power generation costs in 2025: Executive summary International Renewable Energy Agency (IRENA), 2026
  4. The Future of Geothermal Energy: Executive summary International Energy Agency
  5. Annual Technology Baseline 2025: Geothermal National Laboratory of the Rockies (formerly NREL), 2025
  6. A History of Geothermal Energy in America US Department of Energy, Geothermal Technologies Office (archived copy, UNT Libraries web archive, captured 21 December 2020)