Material Insights · Understanding the Material World

Heat-transfer fluids and heat pipes: Evolution

Timeline

The milestones from first idea to today

YearMilestone
1929Dow says it first introduced DOWTHERM fluids, for high-temperature heating where steam is impractical [1]
1932The DOWTHERM name is first used in commerce for diphenyl-based heat-transfer agents, according to its US trademark record [8]
1938Nature describes Dowtherm, a eutectic of diphenyl and diphenyl oxide that melts at 12 °C and reaches 400 °C at modest pressure [2]
1942Richard Gaugler of General Motors puts forward the principle of the heat pipe [3]
1963George Grover at Los Alamos independently develops the device and names it the heat pipe [3]
1996Solar Two begins operating with molten nitrate salt as heat-transfer fluid and storage, and Endeavour carries three Los Alamos heat pipes [4][5]

as of 2026-11-12

Lineage

The technologies it came from and the ones that came from it

Came before it Works with Enables

as of 2026-11-12

Sources

  1. DOWTHERM Heat Transfer Fluids Dow
  2. 'Dowtherm' Nature 141, 1049 to 1050, 1938
  3. The Heat Pipe (G. Yale Eastman, Scientific American 218(5), 38 to 46) Scientific American, reproduced by Advanced Cooling Technologies, 1968
  4. Father of the heat pipe passes away Los Alamos National Laboratory, 2019
  5. Final Test and Evaluation Results from the Solar Two Project (SAND2002-0120) Sandia National Laboratories, via OSTI
  6. DOWTHERM - Trademark Details (serial number 71334668) Justia Trademarks (record of the US Patent and Trademark Office)