Heat-transfer fluids and heat pipes: Overview
What it does
The job the technology does for people, in a short paragraph
Heat carriers move heat without moving fire. A pumped fluid, such as a thermal oil or molten salt, picks up heat at a furnace, solar receiver or reactor and gives it up at a process or a steam generator. Dow dates its first synthetic heat-transfer fluids to 1929 [1], and they were on sale under the DOWTHERM name by 1932 [8]. Heat pipes, sealed tubes that move heat by boiling and condensing a liquid inside, followed from 1963 [3] and now cool laptops and spacecraft [4].
as of 2026-11-12
How it works
The working principle in plain words, step by step
A heat-transfer fluid loop works like a car's cooling system, but hotter. A pump drives the fluid through a heater, where it warms, then on to the user, where it cools, and back again. The fluid is chosen to stay liquid, or to boil at a useful point, over the temperatures needed: Dow's synthetic fluids typically work from 260 to 400 °C [1], where water would need very high pressure to stay liquid. Some fluids are used as vapour, like steam: a condensing vapour gives up its heat at one steady temperature [2]. A heat pipe needs no pump. It is a sealed, evacuated tube lined with a wick [3]. Liquid boils at the hot end, the vapour rushes to the cool end and condenses, giving up its latent heat, and the wick, a capillary lining, draws the liquid back [3][4].
as of 2026-11-12
Key figures
The handful of numbers that size it up, each with its unit, year and source
| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Typical upper working temperature of synthetic heat-transfer fluids | 400 | °C | – | [1] |
| Boiling point of Dowtherm at atmospheric pressure | 258 | °C | 1938 | [2] |
| Highest operating temperature reached by heat pipes by 1968, over | 3600 | °F | 1968 | [3] |
| Turbine powered by molten-salt heat at the Solar Two plant | 10 | MWe | 1999 | [5] |
as of 2026-11-12. The 400 °C is the top of the maker's typical range of 260 to 400 °C; its page shows no date, so no year is given [1]. Solar Two operated from June 1996 to April 1999 [5]. A 1968 review put heat pipes at several thousand times more effective at moving heat than the best metal conductors [3].
Where it is used
The main places and products the technology is found in
- Chemical plants that heat reactors and stills above the reach of steam, such as making dye intermediates and distilling fatty acids and glycerine [2]
- Concentrating solar power, where molten nitrate salt carries and stores the heat [5]
- Heat pipes that cool microchips in laptops [4]
- Heat pipes that keep spacecraft electronics from overheating [4]
as of 2026-11-12
Scale today
How much of it there is now: units in use, made each year and who uses it
- Unit
- units
- Year
- 2026
- Note
- No world count of fluid systems or heat pipes was found in the sources opened.
as of 2026-11-12
Sources
- DOWTHERM Heat Transfer Fluids Dow
- 'Dowtherm' Nature 141, 1049 to 1050, 1938
- The Heat Pipe (G. Yale Eastman, Scientific American 218(5), 38 to 46) Scientific American, reproduced by Advanced Cooling Technologies, 1968
- Father of the heat pipe passes away Los Alamos National Laboratory, 2019
- Final Test and Evaluation Results from the Solar Two Project (SAND2002-0120) Sandia National Laboratories, via OSTI
- DOWTHERM - Trademark Details (serial number 71334668) Justia Trademarks (record of the US Patent and Trademark Office)