Material Insights · Understanding the Material World

Industrial heat pumps and vapour recompression: Evolution

Timeline

The milestones from first idea to today

YearMilestone
1857Peter von Rittinger tries to realise vapour recompression in a 14 kW pilot plant at the Ebensee saltworks in Austria [1]
1877The vapour-compression heat pump at the Bex saltworks in Switzerland goes into operation [1]
1926Escher Wyss, with the saltworks and Kummler and Matter, builds the first industrial vapour compression plant with a 344 kW radial compressor [1]
2025Heat pumps meet below 1% of light industry heat demand, against about 8% by 2035 in the IEA's stated-policies scenario [4]

as of 2026-11-12

Lineage

The technologies it came from and the ones that came from it

Came before it Can replace
  • Blr Boilers, furnaces and stoves An evaporator on MVR needs about 30 to 50 kWh of electricity per tonne evaporated and only minor steam, in place of heating it with live steam [3].

as of 2026-11-12

Sources

  1. Meilensteine der Wärmepumpengeschichte Martin Zogg, Verfahrens- und Energietechnik, Oberburg (Switzerland), lecture paper
  2. Heating options for thermal separation plants: MVR and TVR, specific utility consumption table (vendor data) GEA Group, 2026
  3. Heat Pump Monitor 2026: Key findings IEA, 2026
  4. IEA HPT Annex 58 about HTHPs: State of the art review, demonstration cases and development perspectives IEA Heat Pumping Technologies TCP, High-Temperature Heat Pump Symposium slides (Zühlsdorf, Poulsen, Schlosser), 29 March 2022, 2022