Latent heat and cold storage: Overview
What it does
The job the technology does for people, in a short paragraph
Latent heat storage keeps heat or cold in a material that melts and freezes, so it holds a lot of energy at a steady temperature. People stored winter ice in icehouses from at least about 2081 BCE [1][9]. Today office towers make ice at night to cool by day, cutting peak power demand [5], and phase change materials such as salt hydrates and waxes store heat in buildings [3].
as of 2026-11-12
How it works
The working principle in plain words, step by step
A material that is melting takes in a large amount of heat without getting any warmer, and gives the same heat back when it freezes [2]. A latent store uses this. To store cold, a chiller freezes water into ice when power is cheap, often at night; during the day the melting ice cools the building in place of a chiller [5]. To store heat, a material that melts at a useful temperature, such as a salt hydrate or a paraffin wax, is melted by spare heat and later freezes again, releasing it almost at one temperature [3]. Salt hydrates hold the most per volume, 50 to 130 kWh per cubic metre [3]. Waxes and fatty acids conduct heat poorly [3], so stores need large contact surfaces.
as of 2026-11-12
Key figures
The handful of numbers that size it up, each with its unit, year and source
| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| World installed thermal energy storage, all kinds | 234 | GWh | 2019 | [4] |
| Thermal storage used for cooling in buildings and district cooling | 13.9 | GWh (over) | 2020 | [4] |
| Latent heat of fusion of low-cost salt hydrates, upper end of range (100 to 290) | 290 | J/g | 2021 | [3] |
| Volumetric storage of salt hydrates, upper end of range (50 to 130) | 130 | kWh/m3 | 2021 | [3] |
| Summer peak demand cut by ice storage at 55 Water Street, New York | 2.1 | MW | 2019 | [5] |
as of 2026-11-12. The 234 GWh covers all thermal storage, not only latent stores [4]. The 13.9 GWh, the salt hydrate values and the 55 Water Street figure have no data year in their sentences; the years given are publication years.
Where it is used
The main places and products the technology is found in
- Ice thermal storage for air conditioning in large office buildings [5]
- Ice or phase change stores that shift demand in district cooling schemes [4]
- Phase change materials for heating and cooling buildings, between 0 and 65 °C [3]
- Historic ice-houses, recorded at Ur about 2081 BCE and at Terqa, in the kingdom of Mari, about 1780 BCE [1][10]
as of 2026-11-12
Scale today
How much of it there is now: units in use, made each year and who uses it
- Installed
- Over 13.9 GWh of thermal storage used for cooling in buildings and district cooling, within 234 GWh of thermal storage of all kinds in 2019 [4]
- Unit
- GWh
- Year
- 2019
- Note
- The IRENA figures count all thermal storage technologies; no separate world figure for latent stores was found.
as of 2026-11-12
Sources
- Shulgi years 11-20 (year names of King Shulgi of Ur, after Frayne, RIME 3/2) Cuneiform Digital Library Initiative (CDLI) wiki, University of Oxford
- April 23, 1762: Joseph Black and Latent Heat American Physical Society, APS News, 2012
- Review of Low-Cost Organic and Inorganic Phase Change Materials with Phase Change Temperature between 0°C and 65°C (Hirschey, Kumar, Turnaoglu, Gluesenkamp and Graham) Oak Ridge National Laboratory and Georgia Institute of Technology, 6th International High Performance Buildings Conference at Purdue (on OSTI), 2021
- Innovation Outlook: Thermal Energy Storage IRENA, 2020
- Energy storage case study: ice thermal storage in a 53-storey Manhattan office building (ES-newwater-cs) NYSERDA, 2018
- Shulgi Encyclopaedia Britannica
- Tablette (AO 20161): tablette de Zimri-Lim, roi de Mari Musée du Louvre, collections database