Nickel-rich lithium-ion batteries: Engineering
Architecture
The main parts and what each one does
| Component | Role |
|---|---|
| Cathode (positive electrode) | A layered nickel manganese cobalt or nickel cobalt aluminium oxide coated on aluminium foil; it sets most of the energy and the cost |
| Anode (negative electrode) | Graphite coated on copper foil, which stores lithium between its carbon layers when the cell is charged |
| Electrolyte | A lithium salt in organic solvents that carries lithium ions between the electrodes |
| Separator | A thin porous plastic film that keeps the electrodes from touching while letting ions through |
| Cell case | A cylindrical can, a prismatic box or a pouch; prismatic cells are the most common format [2] |
| Battery management system | Electronics that watch the voltage and temperature of each cell and keep them inside safe limits |
as of 2026-11-09
Bill of materials
What it is made of: each part or material with its share or amount
| Part | Amount | Unit | Share | Note |
|---|---|---|---|---|
| Nickel (cathode) | 0.65 | kg/kWh | – | NMC811, 2023 [7] |
| Lithium (cathode and electrolyte) | 0.1 | kg/kWh | – | NMC811, 2023 [7] |
| Cobalt (cathode) | 0.08 | kg/kWh | – | NMC811, 2023 [7] |
| Manganese (cathode) | 0.08 | kg/kWh | – | NMC811, 2023 [7] |
| Cathode active material | – | – | 40 to 50% of cell cost | For NMC cells, against 25 to 30% for LFP [2] |
as of 2026-11-09
How it is made
The main steps of making it, in order
- Make the cathode powder: mix nickel, manganese and cobalt salts into a precursor, then fire it with a lithium compound
- Mix each electrode powder with a binder and solvent into a slurry and coat it on metal foil (aluminium for the cathode, copper for the anode), then dry and press it
- Cut the coated foils and stack or wind them with separator film between them
- Put the stack in its can or pouch, fill it with electrolyte and seal it
- Formation: charge and discharge the new cells slowly for the first time, so a protective film grows on the graphite, then age and grade them
- Assemble graded cells into modules and packs with cooling and a battery management system; new factories can take more than five years to reach close to full output and yields above 90% [2]
as of 2026-11-09
Engineering breakthroughs
The engineering advances that made it work, and why each mattered
| Year | Breakthrough | Why it mattered |
|---|---|---|
| 1985 | A carbon anode in place of lithium metal | It removed the fire risk of metallic lithium and made a cell that could be sold [1] |
| 1991 | Mass production of lithium-ion cells by Sony | The first rechargeable lithium-ion batteries on the market [6] |
| 2001 | NMC cathodes | Mixing nickel and manganese with cobalt raised energy density and safety over lithium cobalt oxide [6] |
as of 2026-11-09
Trade-offs
What designers have to give up to gain something else
- More nickel stores more energy per kilogram, but the cathode becomes less stable and the cell ages faster
- Less cobalt cuts cost and supply risk, but cobalt helps keep the layered structure intact
- Nickel-rich cells store more than LFP (265 against 205 Wh/kg at best in 2025) but their packs cost more than 40% more [2]
- Thicker electrodes give more energy per cell but charge more slowly
as of 2026-11-09
Standards
The standards that define and test it
- IEC 62660-1:2018: performance and life testing of lithium-ion cells for electric vehicles (capacity, power, energy density, storage and cycle life) [16]
- UN Manual of Tests and Criteria, section 38.3: eight tests, from altitude simulation to forced discharge, before lithium cells and batteries may be transported [17]
- Regulation (EU) 2023/1542 on batteries: carbon footprint information, labels from 2026 and a QR code from 2027 [15]
as of 2026-11-09
Sources
- The Nobel Prize in Chemistry 2019, press release The Royal Swedish Academy of Sciences, 2019
- Global EV Outlook 2026: Electric vehicle batteries International Energy Agency, 2026
- History of the lithium-ion battery Wikipedia, 2026
- Investigating the U.S. battery supply chain and its impact on electric vehicle costs through 2032 (Shen, Slowik and Beach) International Council on Clean Transportation, 2024, p. 9
- Sustainability rules for batteries and waste batteries (summary of Regulation (EU) 2023/1542) EUR-Lex, 2024
- IEC 62660-1:2018 Secondary lithium-ion cells for the propulsion of electric road vehicles, Part 1: Performance testing ANSI Webstore, 2018
- UN38.3 Transport Test Battery Design, 2024