Nickel-rich lithium-ion batteries: Materials
Materials it needs
The commodities and chemicals it needs per unit, its share of each one's demand and how critical each is
Needs 7- Ni Nickel 0.65 kg/kWh · 2023 · criticality high The main cathode metal of NMC811 [7]; battery-grade nickel is an EU strategic raw material [9].
- Li Lithium 0.1 kg/kWh · 2023 · criticality high In the cathode and the electrolyte salt [7]; China makes 70% of lithium chemicals [8].
- Co Cobalt 0.08 kg/kWh · 2023 · criticality high Stabilises the cathode [7]; the DRC supplies almost two-thirds of the world's cobalt [2].
- Mn Manganese 0.08 kg/kWh · 2023 · criticality medium Part of the NMC cathode [7]; battery-grade manganese is an EU strategic raw material [9].
- Gr Graphite criticality high The anode; China produces over 95% of battery-grade graphite [8].
- Cu Copper criticality medium The anode current collector foil; copper is an EU strategic raw material [9].
- Al Aluminium criticality low The cathode current collector foil and many cell cases.
- CAM Battery cathode materials NMC and NCA powders, 40 to 50% of the cost of an NMC cell [2].
- AAM Battery anode materials Natural or synthetic graphite powder.
- LiPF6 Battery electrolytes A lithium salt dissolved in organic carbonate solvents.
as of 2026-11-09
Critical materials
The materials whose supply could hold it back
- Cobalt: the DRC supplies almost two-thirds, and cobalt prices doubled in the year to early 2026 [2]
- Graphite: China produces over 95% of battery-grade graphite [8]
- Lithium: China produces 70% of lithium chemicals, and lithium prices in early 2026 were more than twice those of a year before [8][2]
- Nickel: Chinese companies own 65% of refined nickel output, though only 30% is refined in China [8]
- All of lithium, nickel, cobalt, manganese and natural graphite in battery grade, and copper, are strategic raw materials under the EU Critical Raw Materials Act [9]
as of 2026-11-09
Using less
How makers are cutting the amount of scarce or costly material it needs
The main thrift has been cobalt. The first layered cathode was lithium cobalt oxide; NMC111 replaced two-thirds of the cobalt with nickel and manganese, and today's NMC721 and NMC811 have around 10% cobalt in their metal content [2]. The cost of that shift is stability, so makers add coatings and dopants to keep high-nickel cathodes from degrading. The other route is to leave nickel and cobalt out altogether, which is what LFP and sodium-ion cells do [2].
as of 2026-11-09
Substitutes
Materials that could replace the ones it uses now, and what each trade costs
| Material | Substitute | Trade off |
|---|---|---|
| Cobalt | More nickel (NMC811) or aluminium (NCA) | Less stable cathode and shorter life unless coated or doped |
| Nickel and cobalt | Iron phosphate (LFP) | Packs more than 40% cheaper, but at most 205 against 265 Wh/kg [2] |
| Lithium | Sodium (sodium-ion cells) | Up to 175 Wh/kg and good cold performance, but manufacturing capacity is about 1% of lithium-ion's [2] |
| Graphite | Silicon blended into the anode | More energy per volume, but silicon swells as it takes in lithium, which shortens life |
as of 2026-11-09
Sources
- Global EV Outlook 2026: Electric vehicle batteries International Energy Agency, 2026
- Investigating the U.S. battery supply chain and its impact on electric vehicle costs through 2032 (Shen, Slowik and Beach) International Council on Clean Transportation, 2024, p. 9
- Global Critical Minerals Outlook 2025 (extract) IEA, 2025, executive summary
- More on Critical Raw Materials (lists of the Critical Raw Materials Act) European Commission Joint Research Centre, Raw Materials Information System, 2024