Material Insights · Understanding the Material World

Passive solar and natural cooling: Industries

Industries

The industries and kinds of firm that use or make it, how far they have taken it up and what it does to them

Made by 4
  • Architects and project-management consultants Design sets orientation, shading and glazing Passive houses turn their main facade within about 30 degrees of south, with large glazed areas [4].
  • Building contractors Airtight, well-insulated construction Builders must meet strict airtightness and insulation levels, tested by pressurisation [4].
  • Float glass makers Triple glazing Special three-pane glazing in insulated frames is part of the standard [4].
  • Gypsum board, insulation and roofing makers Very thick insulation Passive houses need building fabric with U-values below 0.15 W per square metre per kelvin, which takes thick insulation in walls, roof and floor [4].

as of 2026-11-11

Sources

  1. Cost Efficient Passive Houses in Central European Climate (Wolfgang Feist) ACEEE 1998 Summer Study on Energy Efficiency in Buildings, proceedings (Wolfgang Feist, Passive House Institute, Darmstadt)