Passive solar and natural cooling: Overview
What it does
The job the technology does for people, in a short paragraph
Passive design heats and cools buildings through their shape and fabric rather than with machines. Facing the main windows towards the winter sun, shading them from the summer sun, insulating well and letting air move through all cut the energy a building needs. Socrates described sun-facing houses before 399 BCE [1][2]. The modern passive house needs about one twentieth of the heating of an average German home [4].
as of 2026-11-11
How it works
The working principle in plain words, step by step
In winter the sun is low, so its light reaches deep through windows facing the equator and warms the rooms; in summer it is high, and overhanging roofs or porticoes shade the same windows [1]. Heavy walls and floors store the day's warmth and give it back at night. Good insulation and airtight walls keep the gained heat in, and in a modern passive house, triple glazing and ventilation that recovers heat from outgoing air mean the sun and the occupants supply most of the warmth [4]. Cooling works the other way round: shade keeps sunlight out, open windows and towers let breezes and rising warm air carry heat away, and surfaces that radiate heat to the clear night sky, or even in daylight, lose heat to space [5].
as of 2026-11-11
Key figures
The handful of numbers that size it up, each with its unit, year and source
| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Measured space heating use of the Darmstadt prototype passive house | 10 | kWh/(m2 a) | 1998 | [4] |
| Heating use of the Darmstadt house as a fraction of the average German dwelling | 0.05 | ratio | 1998 | [4] |
| Temperature drop below the air achieved by a radiative cooling panel in direct sunlight | 4.9 | °C | 2014 | [5] |
| Cooling power of that panel at air temperature | 40.1 | W/m2 | 2014 | [5] |
| Residential air conditioners in operation worldwide, the load passive cooling can reduce | 1.5 | billion units | 2022 | [6] |
as of 2026-11-11. The Darmstadt house has been lived in since October 1991 [4]; the paper gives its measured figure without a data year, so 1998, the year of the ACEEE proceedings it appeared in, is shown as the publication year, not the data year. The radiative cooling figures carry 2014, the publication year of the Nature paper [5], not a data year. The 0.05 ratio is the paper's 'about one twentieth'.
Where it is used
The main places and products the technology is found in
- Houses and flats designed to the passive house standard
- Traditional courtyard houses and wind towers in hot, dry regions
- Sun-facing buildings with overhangs, shutters and thick walls
- Offices and schools with natural ventilation and night cooling
- Reflective roof coatings and radiative cooling panels
as of 2026-11-11
Sources
- Memorabilia (Xenophon, translated by E. C. Marchant) Perseus Digital Library (Scaife/Perseids reader)
- Socrates Encyclopaedia Britannica
- Cost Efficient Passive Houses in Central European Climate (Wolfgang Feist) ACEEE 1998 Summer Study on Energy Efficiency in Buildings, proceedings (Wolfgang Feist, Passive House Institute, Darmstadt)
- Passive radiative cooling below ambient air temperature under direct sunlight (Raman, Anoma, Zhu, Rephaeli and Fan, Nature 515, 540-544; author copy) Fan group, Stanford University, 2014
- Space Cooling International Energy Agency