Material Insights · Understanding the Material World

Recuperators and regenerators: Energy footprint

Energy in use

The energy it uses or converts while it works, and how efficiently

Consumption
None directly; a little fan power to push gas and air through the exchanger
Conversion
Moves heat from furnace exhaust into the combustion air
Efficiency
22
Unit
% fuel saved in the DOE example (air preheated to 800°F)
Note
Savings rise with exhaust and air temperature: the DOE table, for natural gas burned with 10% excess air, runs from 13% to 51% [5]. DOE advice is to consider waste heat recovery when exhaust is hotter than 1,000°F [6].

as of 2026-11-12

Energy links

The energy sources and technologies it uses, holds, converts, loses or gets back

Recovers
  • Ht Heat Takes heat from furnace exhaust back into the combustion air [5][6].
  • Blr Boilers, furnaces and stoves Cuts the fuel a combustion furnace burns for the same heat, by 22% in the DOE example [5].

as of 2026-11-12

Sources

  1. Preheated Combustion Air, Process Heating Tip Sheet #1 (DOE/GO-102007-2482) US DOE Industrial Technologies Program, 2007
  2. Install Waste Heat Recovery Systems for Fuel-Fired Furnaces, Process Heating Tip Sheet #8 US DOE Industrial Technologies Program, 2005