Sensible heat storage: Evolution
Timeline
The milestones from first idea to today
| Year | Milestone |
|---|---|
| 1860 | Cowper invents the first successful hot-blast stove, which stores heat in brick to warm furnace air [9] |
| 1889 | Edwin Ruud patents the first automatic storage water heater [1] |
| 1904 | The Franklin Institute honours Ruud for his automatic water heater [1] |
| 1996 | Solar Two in California is due to start, converting the Solar One tower to molten nitrate salt with a new thermal store [3] |
| 2015 | The 200,000 m3 Vojens pit store starts work, letting solar heat supply more than half the town's yearly heat [4] |
| 2019 | Over 234 GWh of thermal storage is installed worldwide [2] |
as of 2026-11-12
Lineage
The technologies it came from and the ones that came from it
Came before it- Blr Boilers, furnaces and stoves Fires and stoves supplied heat directly; storage water heaters such as Ruud's of 1889 banked heat in a tank for later [1].
- Rcp Recuperators and regenerators Brick regenerators such as Cowper's hot-blast stove of 1860 already stored heat in refractory brick for short cycles [9].
- CSP Concentrated solar power Molten salt storage, shown at Solar Two from 1996 [3], lets solar power towers keep generating after sunset.
- DHN District heating and cooling networks Large pit stores feed district heating networks, as at Vojens, where the store is separated from the network water by a heat exchanger [4].
- PCM Latent heat and cold storage Phase-change stores hold more heat per kilogram at a steady temperature, at higher cost; IRENA groups both among thermal storage options [2].
as of 2026-11-12
Sources
- Heater, Water (object record, gift of Brian Tischler) Senator John Heinz History Center, Pittsburgh (collections online)
- Innovation Outlook: Thermal Energy Storage IRENA, 2020
- Solar two: A molten salt power tower demonstration (SAND--95-1828C) Sandia National Laboratories, via OSTI
- World largest thermal pit storage in Vojens State of Green
- Hot-blast stove Encyclopaedia Britannica