Thermochemical storage: Materials
Materials it needs
The commodities and chemicals it needs per unit, its share of each one's demand and how critical each is
Needs 4- Zeo Zeolites criticality low Zeolite and water pairs are a main solid-adsorption option [2].
- Mg Magnesium criticality low Magnesium sulphate stores up to 2.8 GJ/m3 in theory [2]; magnesium chloride is another candidate salt.
- Sr Strontium criticality low Strontium bromide hexahydrate was used in a closed prototype store [4].
- H₂O Water criticality low Water vapour is the reactive gas in water-sorption stores [1].
as of 2026-11-12. No source opened gives amounts per kWh stored. Criticality is the writer's judgement: all are common materials, and no scarcity case has been made in the sources opened.
Critical materials
The materials whose supply could hold it back
- No scarce material is the barrier: the limit is the materials' durability, since most laboratory materials can barely withstand 20 cycles [2].
- Salt hydrates are prone to agglomerating and even melting if over-hydrated [4].
- Lithium chloride and magnesium sulphate stand out for storage density, at 2.08 GJ/m3 in an open system and up to 2.8 GJ/m3 in theory, but these are material values, not working stores [2].
as of 2026-11-12
Sources
- A review of salt hydrates for seasonal heat storage in domestic applications (Donkers et al., Applied Energy 199, 45-68) Eindhoven University of Technology repository, 2017
- Water sorption-based thermochemical storage materials: A review from material candidates to manufacturing routes (Palacios, Navarro, Barreneche and Ding) Frontiers in Thermal Engineering, vol. 2, 2022
- Salt Hydrate Adsorption Material-Based Thermochemical Energy Storage for Space Heating Application: A Review (Yang et al.) Energies, vol. 16, article 2875, 2023