Waste heat for drying, water and food: Science
Principles
The science it rests on, with why each principle matters to it
Relies on- Heat conduction (Fourier's law) Heat moves by conduction through exchanger walls from a hot stream to the water or air being warmed, the flow Fourier described in 1822 [7].
- Latent heat Drying and distillation turn water into vapour, which takes in a large amount of heat without getting hotter, and a desalination plant gets that heat back when the vapour condenses to fresh water.
as of 2026-11-12
Discoveries
The discoveries that made it possible: when, by whom and what was found
| Year | Who | What |
|---|---|---|
| 1822 | Joseph Fourier | Published The Analytical Theory of Heat, the basis for working out how heat moves through solids [7] |
| 1824 | Sadi Carnot | Published Reflections on the Motive Power of Fire, showing that an ideal engine's efficiency depends only on its temperature difference [8] |
as of 2026-11-12
Physical limits
The limits nature sets, today's best and how far there is still to go
| Limit | Value | Unit | Best today | Gap |
|---|---|---|---|---|
| Temperature a task needs: tomato drying 50 to 80°C and greenhouse growing 20 to 25°C | 80 | °C (top of tomato drying range) | Surplus heat of 60 to 140°C from aluminium plants can serve a greenhouse and driers in a modelled Norwegian scheme [4] | Heat cooler than the task needs cannot be used directly and must be lifted with heat pumps [2]. |
as of 2026-11-12
The science explained
The science behind it explained for a curious reader
Picture a warm bath that is too cool for tea but still pleasant to stand a cold bottle in. Waste heat from a factory is like that bath: not hot enough to make steam for a turbine, but enough for a dozen gentler jobs. Carnot showed in 1824 that an engine can only use heat in proportion to the temperature gap it works across [8], so low-grade heat makes little power. But a drier, a greenhouse or a desalination plant needs only warmth. The heat passes by conduction through an exchanger wall [7]. In a desalination plant it goes into evaporating water, and the energy that goes into the vapour is released again when the vapour condenses to fresh water [6][3].
as of 2026-11-12
Sources
- Technology Assessment on Low-Temperature Waste Heat Recovery in Industry, ORNL/TM-2021/2150 (Thekdi, Nimbalkar et al.) Oak Ridge National Laboratory, 2021
- Water Desalination Using Renewable Energy, Technology Brief I12 IEA-ETSAP and IRENA, 2012
- A Novel Concept for Sustainable Food Production Utilizing Low Temperature Industrial Surplus Heat (Reyes-Lúa et al.), Sustainability 13(17) MDPI, 2021
- Revisiting Black's Experiments on the Latent Heats of Water (Guemez, Fiolhais and Fiolhais), The Physics Teacher 40 American Association of Physics Teachers, via University of Coimbra, 2002
- Joseph Fourier Encyclopaedia Britannica
- June 12, 1824: Sadi Carnot Publishes Treatise on Heat Engines APS News, American Physical Society, 2009