Waste heat for drying, water and food: What to track
Watch both the heat supplier and the product buyer
Track both the host's heat supply and the user's own output, since either side can sink the project.
| Category | Attribute | Latest | Trend | Why it matters |
|---|---|---|---|---|
| Operational | Capacity factor and operating hours | Desalination and capture need year-round heat; drying and greenhouses are seasonal2 | ↕ volatile | Seasonal users struggle to reach 3,000 to 4,000 h/yr. |
| Techno-economic | Thermal efficiency over time (heat per unit output) | MED and MSF about 80.6 kWh heat per m31 | → stable | Rising heat use per m3 signals scaling. |
| Counterparty | Host counterparty credit and utilisation rate | Double exposure to heat supplier and product buyer5 | ↕ volatile | Host closure removes free heat. |
| Impact | t CO2e avoided per dollar invested | Grain dryer about USD 51.77 per t CO2 against sample average of USD 9.222 | → stable | Seasonal uses are much costlier per tonne. |
| Maintenance | Heat exchanger fouling and cleaning frequency | Gulf seawater at about 45,000 ppm with high biofouling potential; no cleaning interval found1 | → stable | Scaling cuts output and needs acid cleaning. |
| Policy | Local carbon pricing and penalties | EU ETS allowance (December contract) EUR 82.40/t on 5 October 2026 and EUR 88.3/t on 12 October 2026; EU CBAM definitive since 1 January 2026, certificates priced from ETS auctions; India CCTS compliance for about 490 entities in seven sectors (2025-26 and 2026-27, baseline 2023-24), BEE expected credits to be issued around October 2026 and first trading between November 2026 and January 2027151671718 | ↕ volatile | The carbon price sets part of the value of every tonne of fuel avoided; Indian obligated sectors (cement, aluminium, pulp and paper, refining, petrochemicals, textiles, chlor-alkali) are typical recovery hosts. |
| Technology-specific | Desalinated water cost | USD 1 to 2 per m3; about 0.5 for large plants (2012 data)1 | → stable | Waste-heat MED must beat RO on this metric. |
| Technology-specific | Capture solvent reboiler duty | about 3.5 GJ per t CO2 for 30% MEA (3.46 pilot, 3.53 stated in a cement study whose flows imply about 4.4, calculated)89 | ↗ improving | Lower duty means more CO2 captured per unit of waste heat. |
Sources
- Water Desalination Using Renewable Energy, Technology Brief I12 IEA-ETSAP and IRENA, 2012
- Not Just Hot Air: Low-Cost Decarbonization through Heat Recovery (Zahlan and Talan, Cadmus), ACEEE Summer Study on Energy Efficiency in Industry ACEEE, 2021
- Waste Heat Recovery: Technology and Opportunities in U.S. Industry (BCS Inc. for US DOE Industrial Technologies Program) US Department of Energy, 2008
- CBAM definitive regime European Commission, DG Taxation and Customs Union, 2026
- Comparative techno-economic analysis of the integration of MEA-based scrubbing and silica PEI adsorbent-based CO2 capture processes into cement plants (Jaffar et al.), Journal of Cleaner Production 414, 137666 Elsevier (open access, Ulster University repository), 2023
- Results from pilot-scale CO2 capture testing using 30 wt% MEA at a Waste-to-Energy facility (Vinjarapu et al.), Applied Energy 355 Elsevier (via RePEc IDEAS), 2024
- European carbon prices drop to 7-week low as market eyes upcoming policy agenda (EUA December contract, ICE data) S&P Global Commodity Insights, 2026
- European carbon prices rose to EUR 88/t in October (ICE data) GMK Center, 2026
- Compliance obligations under India's Carbon Credit Trading Scheme enter into force for seven sectors International Carbon Action Partnership (ICAP), 2026
- India to launch first carbon trading programme by October 2026 (BEE comments on CCTS credit issuance and trading) Outlook Business, 2026