Waste-heat power (steam Rankine): Science
Principles
The science it rests on, with why each principle matters to it
Limited by- Carnot's limit on heat engines A heat engine's efficiency is set by its temperature difference [6]; waste-heat Rankine cycles, steam or organic, typically reach 30% to 50% of the Carnot efficiency [2].
- Latent heat Boiling water takes in a large amount of heat without getting hotter, and the condenser takes that heat out again, so most of the heat a steam cycle handles goes into and out of the change between water and steam.
as of 2026-11-12
Discoveries
The discoveries that made it possible: when, by whom and what was found
| Year | Who | What |
|---|---|---|
| 1824 | Sadi Carnot | Published Reflections on the Motive Power of Fire, showing that an ideal engine's efficiency depends only on its temperature difference [6] |
| 1859 | William Rankine | Published Manual of the Steam Engine and other Prime Movers, the first systematic treatment of steam-engine theory, which introduced the Rankine cycle [4][5] |
as of 2026-11-12
Physical limits
The limits nature sets, today's best and how far there is still to go
| Limit | Value | Unit | Best today | Gap |
|---|---|---|---|---|
| Rankine cycle efficiency (steam or organic) compared with the Carnot ideal in waste-heat service | 50 | % of Carnot (top of range) | Typically 30% to 50% of the Carnot efficiency [2] | The remaining 50% or more of the ideal is lost in real turbines, boilers and the condenser; the fact sheet gives no breakdown. |
as of 2026-11-12
The science explained
The science behind it explained for a curious reader
Think of a waterwheel that works on a drop in height. A heat engine works on a drop in temperature: heat flows from the hot exhaust to the cooler condenser, and a turbine takes some of the flow as work [6]. The steam cycle makes this practical. Water is cheap to pump as a liquid, and when it boils it expands enormously, so steam can spin a turbine [2]. When the steam is cooled in the condenser it gives up its hidden heat and becomes liquid again, ready to repeat the loop [7][2]. Rankine laid out this loop in 1859 [4]. Even a perfect engine, Carnot showed, can only convert a part of the heat [6], and real waste-heat plants reach about 30% to 50% of that part [2].
as of 2026-11-12
Sources
- Waste Heat to Power, CHP Technology Fact Sheet Series (DOE/EE-2347) US Department of Energy, 2021
- William John Macquorn Rankine Encyclopaedia Britannica
- Manual of the Steam Engine and other Prime Movers Encyclopaedia Britannica
- June 12, 1824: Sadi Carnot Publishes Treatise on Heat Engines APS News, American Physical Society, 2009
- Revisiting Black's Experiments on the Latent Heats of Water (Guemez, Fiolhais and Fiolhais), The Physics Teacher 40 American Association of Physics Teachers, via University of Coimbra, 2002