Lifting crane: Overview
What it does
The job the technology does for people, in a short paragraph
A crane lifts heavy loads straight up and moves them sideways, using ropes, pulleys and a winch to multiply a small force. Greek builders adopted it for temple stones in the late sixth century BCE [1]; before that, blocks went up on ramps [2]. Today cranes build towers, load ships and set offshore platforms; the largest single crane lift, in 2019, was 15,300 tonnes [8].
as of 2026-11-10
How it works
The working principle in plain words, step by step
A crane has three parts: a frame or boom that holds a pulley high above the load, a rope system, and a winch that winds the rope in. With one fixed pulley the rope only changes direction. With a block of several pulleys at the top and another at the hook, the load hangs on several strands of rope. Each strand carries a share of the weight, so the pull needed falls, while the length of rope to wind in rises by the same factor. This is the trade of every simple machine: less force over a longer distance [6]. The winch adds more advantage, because a large wheel or crank turns a small drum. Romans turned theirs by hand or with a treadwheel [5]; modern cranes use motors. The crane must also not tip over, so a counterweight or wide base balances the load.
as of 2026-11-10
Key figures
The handful of numbers that size it up, each with its unit, year and source
| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Load one man at the winch could raise with a Roman three-pulley crane (trispastos) | 150 | kg | – | [5] |
| Load a Roman polyspastos could lift when worked by four men at the winch | 3000 | kg | – | [5] |
| Record single crane lift, Leviathan platform topsides | 15,300 | t | 2019 | [8] |
| Combined capacity of the two cranes of the Sleipnir crane vessel | 20,000 | t | 2019 | [8] |
as of 2026-11-10. The Roman capacities are idealised calculations reported by Wikipedia [5] from Dienel and Meighörner (1997) and Humphrey, Oleson and Sherwood (1998): 50 kg of pull per man multiplied by the number of rope strands, with friction ignored. No better open source was found for them.
Where it is used
The main places and products the technology is found in
- Building sites, from Greek temples [1] to tower cranes on high-rise buildings [7]
- Ports, where harbour cranes are documented from 1244 [5]
- Offshore oil and gas and wind projects, using crane vessels [8]
- Factories and warehouses, with overhead cranes
- Mobile cranes on trucks for short jobs
as of 2026-11-10
Scale today
How much of it there is now: units in use, made each year and who uses it
- Installed
- No world count of cranes in use was found
- Note
- The largest crane vessel, Sleipnir, has two cranes of 10,000 t each [8].
as of 2026-11-10
Sources
- Lifting in early Greek Architecture (J. J. Coulton), The Journal of Hellenic Studies 94 Cambridge University Press, 1974
- Building construction: Bronze Age and early urban cultures Encyclopaedia Britannica, section Bronze Age and early urban cultures
- Wikipedia: Crane (machine)
- Simple machine Wikipedia
- The Liebherr Group in the years 1949-1960 Liebherr
- Sleipnir sets 15,300 tonne lift record (Alex Dahm) KHL Group (Crane & Transport Briefing), 2019