Material Insights · Understanding the Material World

Metal casting (lost wax)

Molten metal poured into a mould takes its shape; lost wax gives fine detail.

Making things · Forming and joining · No. 319

  • Prehistoric
  • Readiness 9 of 9
  • Process
Making things · Technology

A wax model, a clay coat and a fire: the trick that cast a copper amulet 6,000 years ago now shapes jet engine blades.

Chart: Illustration: Metal casting (lost wax)

Where it comes from

Chart: Map of where it comes from

Copper workers in South Asia and the Near East found that a wax model coated in clay could be melted out to leave a perfect mould. A Mehrgarh amulet is 6,000 years old; the Nahal Mishmar hoard followed by 3500 BC.

Three things to know
  1. The oldest known lost-wax casting is a small wheel-shaped amulet of nearly pure copper from Mehrgarh, about 6,000 years old.
  2. Industrial investment casting began at the Haynes-Stellite Company in Indiana from 1937, and was later used for jet turbine blades that could not be forged or machined.
  3. Foundries made about 120 million tonnes of castings in 2023, and China made 51.9 million tonnes of them.
The journey
  1. 1 ModelThe object is shaped in wax
  2. 2 MouldThe wax is coated in clay or ceramic slurry, which hardens
  3. 3 BurnoutThe mould is heated and the wax melts and runs out
  4. 4 PourMolten metal fills the hollow the wax left
  5. 5 FinishThe mould is broken away and the casting is cleaned
Go deeper pick a tab to open it in full