Material Insights · Understanding the Material World

Metal casting (lost wax): Overview

What it does

The job the technology does for people, in a short paragraph

Casting gives metal a shape by pouring it, molten, into a hollow mould. It makes parts too complex or too large to hammer or cut, such as engine blocks, pump bodies, statues and turbine blades. The lost-wax method, used for about 6,000 years [1], copies fine detail from a wax model. Foundries made about 120 million tonnes of castings in 2023 [4], and about 90% of US durable goods include castings [5].

as of 2026-11-10

How it works

The working principle in plain words, step by step

A maker first shapes the object in wax. The wax model is covered with clay, or today with layers of ceramic slurry and sand, which dry into a hard shell. The mould is then heated so the wax melts and runs out, leaving a hollow of exactly the same shape [1]. Molten metal is poured in and fills every detail the wax had. As the metal cools it gives up its latent heat and turns solid in the shape of the mould. The mould is broken away to free the casting, which is cleaned and trimmed. Because the mould is destroyed, every piece needs a new wax model; sand casting, used for most tonnage, packs sand around a reusable pattern instead.

as of 2026-11-10

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
World casting production120million tonnes2023[4]
Casting production in China51.9million tonnes2023[4]
Casting production in India15.16million tonnes2023[4]
Direct jobs in US metalcasting160,000jobs– [5]

as of 2026-11-10. The 2023 figures are from a 2026 review of world casting production [4], which rounds the world total to about 120 million tonnes; the American Foundry Society page shows no date.

Where it is used

The main places and products the technology is found in

  • Engine blocks, cylinder heads and other car and truck parts
  • Pump, valve and machine bodies
  • Jet engine and gas turbine blades made by investment casting
  • Jewellery, dental crowns and medical implants
  • Bronze sculpture and bells

as of 2026-11-10

Scale today

How much of it there is now: units in use, made each year and who uses it

Made per year
About 120 million tonnes of castings [4]
Unit
tonnes of castings
Year
2023
Note
Counts all metal castings, of which lost-wax (investment) castings are a small, high-value part; no source gives their tonnage.

as of 2026-11-10

Sources

  1. High spatial dynamics-photoluminescence imaging reveals the metallurgy of the earliest lost-wax cast object Nature Communications, via PubMed Central, 2016
  2. Casting Production in Poland and Worldwide during the Past 60 Years Archives of Foundry Engineering (M.S. Soiński and A. Jakubus), Polish Academy of Sciences, 2026, Table 3 and Summary; DOI 10.24425/afe.2026.157982
  3. Industry Statistics American Foundry Society