Material Insights · Understanding the Material World

Mechanical clock

A falling weight is released in steady steps by an escapement to keep time.

Sensing and measurement · Timekeeping · No. 297

  • Medieval and early modern
  • Readiness 9 of 9
  • Component
Sensing and measurement · Technology

Medieval monks made a falling weight tick in small steady steps, and Europe began to live by the hour.

Chart: Illustration: Mechanical clock

Where it comes from

Chart: Map of where it comes from

In 1271 Robertus Anglicus wrote that clockmakers were trying to make a wheel turn exactly once a day. By the late 13th century England had several weight-driven clocks, including one at Dunstable Priory in 1283.

Three things to know
  1. The Salisbury Cathedral clock, built in 1386, is thought to be the oldest mechanical clock that still survives.
  2. Early verge clocks could be wrong by perhaps an hour a day; Huygens's pendulum of 1656 cut the error to under a minute.
  3. The verge-and-foliot escapement, in variants, ruled clockmaking for more than 300 years.
The journey
  1. 1 PowerA weight on a rope, or later a coiled spring
  2. 2 Gear trainWheels pass the turning force along and set the speed of the hands
  3. 3 EscapementA toothed wheel is let go one tooth at a time
  4. 4 RegulatorA swinging bar, pendulum or balance wheel sets the beat
  5. 5 DisplayA bell, a dial and hands show the hour
Covered in Vibration, waves and resonance in machines and structuresEngineering
Go deeper pick a tab to open it in full